Datasheet

System on a Module Overview
August 2016 Intel® Joule™ Datasheet
Document number: 566641 rev. 1.0 Page 10
2.2 Intel® Joule™ feature summary
2.3 Expansion board requirements
The Intel® Joule™ Expansion Board Design Guide (See Section 1.2) provides design recommendations for designing customer
expansion boards. At a minimum, the following elements are required to enable successful module boot and operation.
2.3.1 Method for connecting module to expansion board
The module must be securely mounted to an expansion board in a method that maintains full engagement of the board-to-
board interface connectors. See the Intel® Joule™ Platform Mechanical Descriptor for more information.
Table 3 Intel® Joule™ features
Domain Attribute Value Notes
Compute
System on a Chip 14nm Intel® Atom™ quad-core 4 cores supporting 2 threads per core
Address Bus Size 64-Bit (x86-64)
Cache 4MB L1 2MB per core-pair
RAM
Type and Speed LPDDR4 (4 lanes, 3200 MT/sec) Integrated Package on Package
Graphics
Execution Units 12EUs (2x6) on 550x and 18EUs (3x6) on 570x
Open Graphics Libraries Open GL 3.1ES, Open GL4.3 & Open CL 2.0
Display
MIPI-DSI Output MIPI-D PHY1.1 with 4 lanes 1280x800 via expansion board connectors
HDMI Output HDMI 1.4b 1080p at 60fps via expansion board
connectors
Storage
Type Supported eMMC 5.0 Max eMMC speed of 400 MB/second
MIPI CSI
Interface Type CSI2 D-PHY1.1 and CSI2 D-PHY 1.2 Two connectors, GPIO, I2C and Power
Lanes and configurations 4 lanes per MIPI-CSI connector Up to 4 cameras
Still & video capture 13MP, 4k x 2k at 30fps with DVS
Expansion
Connector
Module to expansion board Two, 2x50 pin connectors Hirose Electric Co LTD*
Part Number DF40C-100DP-0.4V
Audio
Number of DMIC 2 Routed via expansion board connectors
Number and Speed of I
2
S One I
2
S at 9.6 MHz
USB
USB 3.0 compliant 1 Type C OTG and 1 Host USB 3, Port 0 is dedicated to Type C
USB 3, Port 1 is multiplexed with PCIe
PCIe*
Number of Ports / lanes 1 port / 1 lane Multiplexed with USB3, Port1
Max Speed 5 Gb/s
SIO
I
2
C 5 ports (3 LPSS, 2 ISH as LPSS) Master Mode; max 3.4Mb/s
UARTS 3 full and 1 half Maximum rate of 115.2 kb/s for half speed and
3.6864 Mb/s maximum for full speed mode(s)
SPI 2 ports, 5 chip selects Up to 25MHz
SDIO
Number of ports 1 For SD Card interface
GPIO
Dedicated GPIO lines 8 Up to 48 when remapping interface pins
Additional GPIO lines Up to 48 Interfaces pins can be remapped within BIOS
(tool release pending)
PWM 4
Wi-Fi and
Bluetooth
®
Integrated wireless module Intel® Dual Band Wireless-AC 8260
Bands Dual Band MIMO 2x2 2.4 and 5GHz
Standards IEEE 802.11agn + ac, BT 4.2 core
Security WPA, WPA2, WPS2, 802.11w, WMM, WMM-PS, WFD, Miracast, Passpoint
Dual mode, BT 4.1 Core Over 15 profiles supported WPA2, AES-CCMP encryption
Antenna
Dual MHF4 connectors on module Connection A1 is WiFi only while connection A2 services both BT and WiFi
Power Manager
Integrated PMIC Whiskey Cove Not user programmable