TABLE OF CONTENTS TABLE OF CONTENTS ......................................................... 2 SAFETY ............................................................................... 4 COPYRIGHT ......................................................................... 6 PRODUCT OVERVIEW .......................................................... 7 Package contents .................................................................................. 7 Front view...................................................
OPERATING THE CTL MEET COMPUTE SYSTEM .................... 23 Navigating the desktop ........................................................................ 23 Managing apps................................................................................. 23 Wireless connections ........................................................................... 24 Connecting to a wireless access point ..........................................................24 Connecting to Bluetooth devices ......................
SAFETY Your CTL Meet Compute System is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source. Set up the system on a stable surface. Openings on the chassis are for ventilation.
• Clean only with a soft cloth. If needed, dampen the cloth slightly before cleaning. Never use abrasives or cleaning solutions. • Always disconnect the device from an electrical outlet and power off before cleaning the device. • Do not handle the device with wet hands while it is being charged. This may cause an electric shock. • Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way such as: – Power-supply cord or plug is damaged.
COPYRIGHT Wi-Fi and the Wi-Fi CERTIFIED logo are registered trademarks of the Wireless Fidelity Alliance. SD™ is a trademark of SD Card Association. All products use in this device and trademarks mentioned herein are trademarks or registered trademarks of their respective owners.
PRODUCT OVERVIEW Package contents Please take a moment to check if all the necessary items are included in the package. If anything is missing or damaged, please contact your dealer immediately.
Front view GQE10C model No. Description 1 Power LED » 8 NOTE: *Supports battery charging. PRODUCT OVERVIEW No.
Rear View GQE10C model No. 1 2 3 4 Description Power button Audio jack (3.5mm) DC-in jack /USB type-C port HDMI port » NOTE: No. 5 6 7 8 Description (5) USB3.0 ports ** LAN port* Kensington lock port Reset hole *CTL Meet Compute System models without HDD support single LAN port and models with HDD support dual LAN port.
Status indicators No. A 1 Indicator Color Status Power button Power LED White On Off B Orange LAN port 10 CTL Meet Compute System is switched on. CTL Meet Compute System is switched off. LAN port 2 3 Description Green PRODUCT OVERVIEW Flashing Off On Off Activity on the link. No activity on the link. Active link connection. No link connection.
Specifications Item Processor Description • CPU Intel Core i7-8550U Quad Core 1.86GHz BGA 8MBL3 UHD 620 Operating system Memory Memory type Graphics Google Chrome OS 4G DDR4, 2 slots 2133 DDR4 SODIMM (DDR4-2133), Intel HD120 Graphics VGA Intel CPU integrated Graphics st 1 Storage SSD Storage capacity 128G (upgradable to 256G) Storage type 2242 type LAN Gigabit Networking 10 / 100 / 1000M GbE LAN 802.11ac, WLAN M.
Item Connectors Description Front: Rear: • Audio jack (3.5mm) • LAN port Temperature Humidity VESA mounting Dimensions • (5) USB3.0 ports • HDMI port • DC-in jack • USB type-C port 32°F to 95°F (0°C to 35°C) 30-80% 187 x 111 mm Unit model: • 7.8’’ (w) x 4.84’’ (d) x 1.14’’ (h) • 198 x 123 x 29 mm Weight Unit model: • 1.5 lb. • 645g Output Voltage 19.5V Output Current Input Power cord Security solution 4.
GETTING STARTED Connecting the AC power adapter to your system To connect your CTL Meet Compute System to the power outlet, do the following: 1. Connect one end of the power cord to the AC adapter and the other end to the power outlet. 2. Connect the AC adapter to the DC-in jack of your CTL Meet Compute System. 3. Plug the AC power adapter into a 100V-240V power source. NOTE: The power adapter may vary in appearance, depending on models and your region.
Connecting a display device You can connect a display panel or projector to your system that has the following connectors: • HDMI connector • DisplayPort (USB Type-C™) To establish the HDMI connection, you need to use an HDMI cable (not supplied). 1. Connect one end of the HDMI cable to the HDMI port of your CTL Meet Compute System. 2. Connect the other end of the HDMI cable to the HDMI port of a display device, for example monitor.
Performing additional connections Connecting audio components Connect the audio component into the audio jack of your CTL Meet Compute System. Connecting to local area network (LAN) 1. Connect one end of the RJ-45 cable to the LAN port of your CTL Meet Compute System. 2. Connect the other end of the RJ-45 cable to a network connection device or a network wall connector. » NOTE: For configuring LAN parameters, refer to page 24. Connecting USB devices » NOTE: Your CTL Meet Compute System supports USB2.
GETTING STARTED
Installation Instructions: Mount Kit for Meeting Computer System GQE10C Installing Wall Mount/Installation support ATTENTION: The equipment shall not be mounted higher than 2m from the floor or shall not be mounted higher than 75cm from a flat surface. ● Screw wall mount onto wall (Screw is self-tapping M3.5 24mm long, flat countersunk head) NOTE: Make sure your display device supports VESA mounting.
Mount Kit for Meeting Computer System GQE10C Installing Stand Mount/Installation ● Find the ‘Pill Shape’ marking to orientate the box so that the exhaust/fan faces upwards ● Align ‘Pill Shape’ mounting features and bring the device closer to the mount ● ● The device will naturally be magnetized onto ‘wall mount’ plate Manually adjust if needed for a more secure fit 18 GETTING STARTED (Mounting)
Mount Kit for Meeting Computer System GQE10C Caution: Pulling or pushing on the Meeting Computer System may cause the device to fall. Warning: Do not install your mount kit while your Meeting Computer System is turned on.
GETTING STARTED (Mounting)
Powering on your CTL Meet Compute System To power on your CTL Meet Compute System, press the Power button on the front panel. The Power button LED lights solid white. After you power on the CTL Meet Compute System for the first time, you are asked to configure some device’s basic settings, such as set the language, configure accessibility options, connect to the network, and finally sign in to your CTL Meet Compute System. Follow the on-screen instructions to complete the initial setup.
GETTING STARTED
OPERATING THE CTL MEET COMPUTE SYSTEM Navigating the desktop After the initial setup is configured, you will see the desktop. 6 5 1 34 2 Click on any of the following items: • 1 Launcher: Manage installed apps and perform search. • 2 App launcher: Access most frequently used apps quickly. • 3 Notifications: View notifications. • 4 Status tray: Manage connections, updates, and settings.
2. Do any of the following: • Search for installed apps by typing the app name in the search bar (Search your device, apps, web...). • Review recently accessed apps (appear below search bar). • Click on to review and access all apps installed on your CTL Meet Compute System. Then right click on the app icon and select to open the app in a new tab, pin to shelf, open as window, configure options, remove from Chrome, or review app info.
Connecting to Bluetooth devices 1. Click anywhere on the Status tray to open the tray. 2. Click on next to the Bluetooth icon. 3. Enable Bluetooth function. Your CTL Meet Compute System starts to look for available Bluetooth devices automatically. 4. Click on the Bluetooth device you want to connect to and follow the on-screen instructions to complete pairing. Adjusting volume 1. Click anywhere on the Status tray to open the tray. 2. Click on the slider bar to adjust volume or click on audio.
Configuring CTL Meet Compute System settings 1. Click anywhere on the Status tray to open the tray. 2. Click on . The Settings page opens. 3. Configure any of the following: • Network > Ethernet: LAN connection parameters. » NOTE: Make sure your CTL Meet Compute System is connected to the LAN. Refer to page 16. • Network > Wi-Fi: Connect to a wireless access point. • Bluetooth > Bluetooth: Enable or disable Bluetooth function and pair with compatible devices.
• Appearance > Show Home button: Configure displaying Home button settings. • Appearance > Show bookmarks bar: Enable or disable displaying bookmarks bar on web browser. • Appearance > Font size: Set the font size. • Appearance > Customise fonts: Click to customise fonts. • Appearance > Page zoom: Set the page zoom. • Device > Mouse: Configure mouse settings. • Device > Keyboard: Configure keyboard settings. • Device > Displays: Configure display settings.
OPERATING THE CTL MEET COMPUTE SYSTEM
TROUBLESHOOTING If you experience a problem with your CTL Meet Compute System, refer to the following troubleshooting guide. If a problem persists, contact the service center. The power is switched on, but CTL Meet Compute System does not start: • Make sure that the AC adapter is properly plugged into the DC-in jack of the CTL Meet Compute System and to the power outlet. Refer to page 13.
CTL Contact Information CTL Corporation Address: Telephone: Fax: Web Site: 9700 SW Harvest Court Building #100 800-642-3087 503-526-9135 http://www.ctl.net Telephone Support: Email: Web Site: Phone: 800.645.8670 support@ctl.net http://support.ctl.net CTL Europe / Spain Headquarters: Address: Pontevedra nº8, Piso 1, Oficina 6 36202 Vigo, Pontevedra, Espania Teléfono: Email: Web Site: 986 11 74 73 atencionalcliente@ctl.net http://es.ctl.net Manufacturer: Address: ： CTL/Quanta Computer No.
