Datasheet

Datasheet 77
Thermal Specifications
5.1.2 Thermal Metrology
The minimum and maximum case temperatures (T
CASE
) are specified in Table 5-2 is
measured at the geometric top center of the processor integrated heat spreader (IHS).
Figure 5-2 illustrates the location where T
CASE
temperature measurements should be
made. For detailed guidelines on temperature measurement methodology, refer to the
appropriate processor Thermal and Mechanical Design Guidelines (see Section 1.2).
Table 5-2. Processor Thermal Profile Table
Power (W) T
CASE_MAX
(°C) Power (W) T
CASE_MAX
(°C)
035.0 8050.0
535.9 8550.9
10 36.9 90 51.8
15 37.8 95 52.8
20 38.7 100 53.7
25 39.7 105 54.6
30 40.6 110 55.6
35 41.5 115 56.5
40 42.5 120 57.4
45 43.0 125 58.4
50 44.4 130 59.3
55 45.3 135 60.2
60 46.2 140 61.2
65 47.2 145 62.1
70 48.1 150 63.0
75 49.0