Data Sheet

AC/DC Adapter Power
Caution: Use 5 V adapter for DC Jack J12 only. Components on the board can get damaged by
power supplies with greater voltage.
1.2 Recommended Operating Conditions
• Recommended ambient operating temperature range: 0C to 45C
• Maximum VCCINT current: 0.6 A
• Maximum board power consumption: 3 A @ 5 V when powered by AC/DC adapter
1.3 Handling the Board
When handling the board, it is important to observe static discharge precautions.
Caution: Without proper anti-static handling, the board could be damaged. Use anti-static
handling precautions when touching the board.
Caution: This evaluation board should not be operated in a vibration environment.
1.4 Evaluation Board Revisions
Depending on its revision, your board has one of two flash memory devices: EPCQ64
or EPCQ128A. To determine which device you have, examine the part number label on
the back side of the board, as shown in the following figure.
1 Overview
UG-20082 | 2018.02.05
Intel
®
Cyclone
®
10 LP FPGA Evaluation Kit User Guide
6
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.