Vol 1

Intel® Xeon® Product 2800/4800/8800 v2 Product Family 87
Datasheet Volume One, February 2014
Electrical Specifications
Notes:
1. The loadline specification includes both static and transient limits.
2. This table is intended to aid in reading discrete points on graph in Figure 6-3.
3. The loadlines specify voltage limits at the die measured at the VCC_SENSE and VSS_VCC_SENSE lands.
Voltage regulation feedback for voltage regulator circuits must also be taken from processor VCC_SENSE
and VSS_VCC_SENSE lands.
4. The Vcc_min and Vcc_max loadlines represent static and transient limits. Please see Section 5 for Vcc
Overshoot specifications.
5. The Adaptive Loadline Positioning slope is 0.8 mΩ. and the tolerance is ±15mV.
6. The core Icc ranges are as follows:
• 0-220 A for Intel® Xeon® E7 v2 Processor (155 W)
• 0-170 A for Intel® Xeon® E7 v2 Processor (130 W)
• 0-160 A for Intel® Xeon® E7 v2 Processor (105 W
165 VID - 0.117 VID - 0.132 VID - 0.147 1,2,3,4,5,6
170 VID - 0.121 VID - 0.136 VID - 0.151 1,2,3,4,5,6
175 VID - 0.125 VID - 0.140 VID - 0.155 1,2,3,4,5,6
180 VID - 0.129 VID - 0.144 VID - 0.159 1,2,3,4,5,6
185 VID - 0.133 VID - 0.148 VID - 0.163 1,2,3,4,5,6
190 VID- 0.137 VID - 0.152 VID - 0.167 1,2,3,4,5,6
195 VID - 0.141 VID - 0.156 VID - 0.171 1,2,3,4,5,6
200 VID - 0.145 VID - 0.160 VID - 0.175 1,2,3,4,5,6
205 VID - 0.149 VID - 0.164 VID - 0.179 1,2,3,4,5,6
210 VID - 0.153 VID - 0.168 VID - 0.183 1,2,3,4,5,6
215 VID - 0.157 VID - 0.172 VID - 0.187 1,2,3,4,5,6
220 VID - 0.161 VID - 0.176 VID - 0.191 1,2,3,4,5,6
Table 6-14. V
CC
Static and Transient Tolerance Intel® Xeon® E7 v2 Processor (Sheet 2 of
2)
I
CC
(A) V
CC_MAX
(V) V
CC_TYP
(V) V
CC_MIN
(V) Notes
Figure 6-3. V
CC
Static and Transient Tolerance Loadlines Intel® Xeon® E7 v2 Processor