Guide

Thermal and Mechanical Design
38 Intel® Xeon® Processor E7 2800/4800/8800 v2 Product Family
Thermal/ Mechanical Specifications and Design Guide
2.1.5.5.3 Opening Sequence
For the opening sequence, the goal is to always open the Hinge lever first to prevent
the load plate from springing open. The only option is to release the Hinge lever first.
The Hinge lever in a closed position will block the Active lever from being unlatched. By
opening the Hinge lever first, it creates clearance to open the Active lever.
Opening sequence is shown in Figure 2-23.
1. Open Hinge lever
2. Open Active lever
After opening Active lever, The Hinge lever tail could be pushed to lift the load plate up.
Figure 2-22. ILM Lever Closing Sequence
Active Lever in
Closed Position