Document

Integration Guide for New Dual-Core Intel

Xeon

Processor-Based Servers (or Workstations) Rev 1.1

The software will now complete the installation and proceed to restart the system and

boot into Microsoft* Windows* Server 2003 64-Bit Edition.

You will now notice that your server has a fully functioning operating system installed

and the system will boot into windows and require you to enter a valid name and

password. At this point the only name and password that is valid is the name

“administrator” and the password you entered in the previous section’s graphics

based step 14.

Update Drivers

The final step to hardware configuration is verifying that all hardware devices are

installed and operating properly, if not we must update the drivers for the errant

devices.

Verify Hardware Functionality

To verify that all the hardware in the server is functioning properly, we will access the

‘Device Manager’ which will inform us of our systems health.

1. Click ‘Start’ on the server task bar to bring up the start menu

2. Click ‘Control Panel’ on the start menu to open the control panel

3. Double-click ‘System’ on the control panel to open system properties

4. Click the ‘Hardware’ tab in the system properties to access the hardware

options

5. Click ‘Device Manager’ to open the device manager window

If any devices have dysfunctional drivers there will be a yellow caution triangle on the

left edge of the window and the devices name next to it. The next step is to take record

of each device that needs an updated driver and either use the software that came

with the device to update the driver or look online for the newest driver.

Locate and Install Latest Intel Drivers

1. Open an internet browser and visit http://support.intel.com

2. Click ‘Download’ link located on the top of the middle column

3. In the ‘Find Downloads’ search area on the left border of the page search for

the server board you have. (

Intel® Server Board S5000PSL)

4. On the search results page click on your server board

5. In the ‘Select your operating system‘ scroll menu, scroll and enter ‘Microsoft*

Windows* 2003 Server’ as the operating system