Document

Integration Guide for New Dual-Core Intel
®
Xeon
®
Processor-Based Servers (or Workstations) Rev 1.0
10
Figure 3.3.4 Verify the CEK Spring is Installed for Each Processor Socket
Dual-Core Intel® Xeon® Processor Installation
CAUTION
When unpacking a processor, hold by the edge only to avoid touching the contacts.
A. Open the socket lever
1) Push the lever handle down and away from the socket to
release it.
2) Pull the lever and raise until it stops.
B. Open the load plate
1) Push the rear tab with your finger tip to bring the front end of the load plate up slightly.
2) Open the load plate as shown.
CEK Spring