Document

Integration Guide for New Dual-Core Intel

Xeon

Processor-Based Servers (or Workstations) Rev 1.1

C. Remove the processor protective cover

1) Take the processor out of the box remove the protective shipping

cover.

D. Remove socket protective cover

1) Grasp the socket protective cover tab and pull away from the load plate as shown.

2) Remove the socket protective cover and store for future use.

E. Install the processor

1) Orient the processor with the socket so that the processor cut-outs match the socket notches.

2) Install the processor as shown.

F. Close load plate and socket lever

1) Close the load plate all the way as shown.

2) With your finger, push down on the load plate as shown.

3) Close the socket lever and ensure that the load plate tab

engages under the socket lever when fully closed.