Document

Integration Guide for New Dual-Core Intel
®
Xeon
®
Processor-Based Servers (or Workstations) Rev 1.1
20
5 Microsoft* Windows* Server 2003 64-Bit
Edition Operating System Installation
Outline of Microsoft* Windows* Server 2003 64-Bit
Edition Operating System Installation
Here are the steps you’re going to perform to install the Operating System
1. Text Based Installation
2. Graphics Based Installation
Note: These instructions assume that you are installing Microsoft* Windows* Server
2003 on a computer that is not already running Windows. If you are upgrading from
an older version of Windows, some of the installation steps may differ.
Text Based Installation
1. Turn on the system and quickly insert Microsoft* Windows* Server 2003 64-bit
Edition disk.
a. If you are unable to ‘beat’ the server to the boot device selection step in
the boot sequence with inserting the CD into the drive, simply complete
inserting the CD into the drive and power off the system. Once this is
complete, power the system back on and continue with step 2.
2. The installation will request that
you press F6 if installing third
party SCSI or RAID Controller.
You will need to perform this
action – press F6 when this text
appears across the bottom of the
screen.
3. ask for disk in a:
4. After the installation has finished
loading necessary files, you will
see “Welcome to Setup”. Press
<Enter> to set up Windows now