Intel Desktop Board DX58SO Product Guide - English

Installing and Replacing Desktop Board Components
43
Installing Linked PCI Express x16 Graphics Cards
The Desktop Board supports the use of linked PCI Express x16 graphics cards with
Nvidia SLI technology and ATI CrossFireX technology.
When installing linked graphics cards in the PCI Express x16 connectors, refer to the
card manufacturer’s instructions to determine correct card placement and
interconnection. Use the connectors or cables included with the Desktop Board to
connect the two graphics cards together.
For more complete installation and configuration information refer to the
documentation supplied by the graphics card manufacturer or visit their web site.
Installing a PCI Express x16 Add-in Card
Follow these instructions to install any PCI Express x16 card:
1. Observe the precautions in "Before You Begin" on page 27.
2. Place the ca
rd in a PCI Express x16 connector (Figure 24, A) and press down on
t
he card until it is completely seated in the connector and the card retention notch
on the card snaps into place around the retention mechanism pin on the connector.
3. Secure the card’s metal bracket to the chassis back panel with a screw
(Figure 24, B).
Figure 24. Installing a PCI Express x16 Card