English Product Guide

Intel Desktop Board DX38BT Product Guide

NOTE

The Consumer IR option must be enabled in the system BIOS before it can

function. Press <F2> at boot to enter the system BIOS, and go to Advanced >

Peripheral Configuration > Enhanced Consumer IR, and set this option to

Enabled.

Table 6 shows the pin assignments and

signal names for

the front panel CIR receiver

(input) header and Table 7 shows the pin assignments and signal names for the b

ack

panel CIR emitter (output) header.

Table 6. Front Panel CIR Receiver (Input) Header Signal Names

Pin Signal Name Pin Signal Name

1 Ground 2 LED

3 No Connection 4 Learn-In

5 +5 V Standby 6 Vcc

7 Key (no pin) 8 CIR Input

Table 7. Back Panel CIR Header Emitter (Output) Header Signal Names

Pin Signal Name Pin Signal Name

1 Emitter Out 1 2 Emitter Out 2

3 Ground 4 Key (no pin)

5 Jack Detect 1 6 Jack Detect 2

Chassis Intrusion Header

Figure 27, E shows the location of the chassis intrusion header. This header can be

connected to a mechanical switch on the chassis to detect if the chassis cover is

removed.

Table 8 shows the pin assignments and

signal names for

the chassis intrusion header.

Table 8. Chassis Intrusion Header Signal Names

Pin Description

1 Intruder

2 Ground