Intel MEBX User Guide for Intel 7 Series Chipset

Intel® ME Manageability Features
2. Press Enter to select.
The following options can be selected:
- None - User consent is not required.
- KVM - Local User Consent is required for a remote computer to establish
KVM Remote Control session.
- All - Local User Consent is required for all features listed above.
NOTE: When using Host Based Configuration, Client Control Mode will
override this setting and behave as if the “ALL” option has been selected. More
details regarding Host Based Configuration and Client Control Mode can be
found in the Activator++ User guide and "Intel AMT Release 7.x Start Here"
HTML document in the SDK kit
3.5.3.2 Opt-in Configurable from remote IT
If Intel AMT was setup locally and is in Client Control mode, this setting is not
working. If Intel AMT was setup in Admin Control mode, this setting allows IT
people to change user Opt- in policy remotely.
Under the User Consent Configuration screen,
1. Select ‘Opt-in Configurable from remote IT’.
2. Press Enter to select.
The following options can be selected:
- Disabled – This option disables the remote user’s ability to change User
OPT-IN Policy. In this case only the local user can control the opt-in
policy.
- Enabled – Enables remote user’s ability to change User OPT-IN Policy.
Allows remote user to choose whether or not to request local user consent.
28