Intel vPro Technology Setup and Configuration Guide

Intel Desktop Board DQ57TM
Intel vPro Technology Setup and Configuration Guide
33
1.6 Intel® KVM Remote Control
Intel® KVM Remote Control is available on Intel vPro Q57 Express Chipset-based desktop boards that contain
2010 Intel Core vPro processors with integrated Intel HD Graphics.
Note
: Intel KVM Remote Control is not supported on platforms with discrete graphics.
Note
: For the purposes of this guide, the Intel AMT client system is provisioned in Local (SMB) mode.
If using VNC Viewer+* as the remote management console, the user enters the IP address of the client, as
shown in Figure 33. For Authentication, use the Intel AMT administrator (adm
in) password. On the client
system, a six-digit access code will appear (Figure 34). This is used in the VNC Viewer+ console to gain access
(Figure 35). Figure 36 shows the view of the Intel AMT client as seen from the VNC Viewer+ console.
Figure 33. VNC Viewer+ Console Remote Login
Figure 34. Intel AMT Client Screen Showing Intel KVM Remote Control Access Code