Intel vPro Technology Setup and Configuration Guide

Intel Desktop Board DQ57TM
Intel vPro Technology Setup and Configuration Guide
25
1.2 Intel AMT – Local Configuration
As described in the previous sections, Intel AMT Setup and Configuration is divided into two provisioning
modes: Local (aka SMB or Basic) and Remote (aka Enterprise or Standard/Advanced). To provision Intel
Desktop Board DQ57TM in Local Mode, the user needs to simply enter the Local Setup and Configuration page
under Intel ME in BIOS Setup and set the Computer Name, as shown in Figure 21. As the platf
orm is already
set for IPV4 and DHCP as defaults, no other settings are necessary. F10 Save and Exit will finish the Local
Setup and Configuration process. Once the platform reaches the end of POST, the process will be complete.
The platform may reboot a few times as it populates the firmware’s SMBIOS tables with the updated
information.
Figure 21. Intel AMT - Configuring Computer Name