Intel vPro Technology Setup and Configuration Guide

Intel Desktop Board DQ57TM
Intel vPro Technology Setup and Configuration Guide
24
New for Intel AMT 6.0 is the Redirection Mode setting under SOL/IDE-R, as highlighted in Figure 19. Legacy
pla
tforms (Intel AMT 5.0 and earlier) require specific port initialization commands whenever performing
redirection operations which were eliminated for Intel AMT 6.0. Enabling this mode allows the use of Intel
AMT 5.0 (and earlier) management consoles with this platform.
Figure 20. Intel AMT IntelKVM Remote Control Configuration
As shown in Figure 20, the options for Intel KVM Remote Control not only include enabling and disabling the
Inte
l KVM Remote Control feature, but also include the ability to set the level of user-controlled security. The
user has the ability to allow Intel KVM Remote Control usage with or without user intervention, and to allow a
remote user, such as IT personnel, to set this policy. These features provide greater flexibility to allow
platform maintenance to be performed after hours when no user is present.