Intel Desktop Board DQ57TM Technical Product Specification

2.4 Clear CMOS Header

Figure 15 shows the location of the Clear CMOS header. In order to initiate a CMOS

clear, a jumper (not included) must be connected to the jumper block pins for at least

two seconds (see Table 28).

CAUTION

Initiating a CMOS clear when the board is powered on (S0 mode) or in standby (S1 or

S3 mode) may damage the board.

Figure 15. CMOS Clear Header

Table 28. Clear CMOS

Pin Function

1-2 Clear CMOS

2-3 N/A

No Jumper Normal