Overclocking Assistant

Overclocking Assistant for the Intel

Desktop Board DZ87KLT-75K

Static + Offset Mode: This Static and Office mode (Override mode) is useful

when overclocking or underclocking the BCLK. This method can allow for

adjustment of the entire V/f curve.

2. The other main voltage that can affect the ability to overclock is SVID override

(Input Voltage below). The default for this voltage is 1.7v ~ 1.8v on the Intel

Desktop Board DZ87KLT-75K. The maximum IVR output voltage (IA Cores, The

Ring, and The Graphic) is related to this input voltage. It may be required to raise

this input voltage, when you raise the IA Core voltage or BCLK. Make sure the

minimum voltage between the IVR output voltage (IA cores, Ring, GT) and this

input voltage between 400mv to 450mv. For example: Using LN2, if you increase

the IA Core voltage to 1.6v, this input voltage should also increase to 2v.

In Turbo ratio and BCLK OC, the Processor VR fault is set to disable (uncheck). This

is a risk of using it by the user because the Over-voltage protection (OVP) and