Intel® Desktop Board DP45SG Technical Product Specification June 2008 Order Number: E35965-001 The Intel® Desktop Board DP45SG may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board DP45SG Specification Update.
Revision History Revision -001 Revision History Date ® First release of the Intel Desktop Board DP45SG Technical Product Specification June 2008 This product specification applies to only the standard Intel® Desktop Board DP45SG with BIOS identifier SGP4510H.86A. Changes to this specification will be published in the Intel Desktop Board DP45SG Specification Update before being incorporated into a revision of this document. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS.
Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for the Intel® Desktop Board DP45SG. Intended Audience The TPS is intended to provide detailed, technical information about the Intel Desktop Board DP45SG and its components to the vendors, system integrators, and other engineers and technicians who need this level of information. It is specifically not intended for general audiences.
Intel Desktop Board DP45SG Technical Product Specification Other Common Notation iv # Used after a signal name to identify an active-low signal (such as USBP0#) (NxnX) When used in the description of a component, N indicates component type, xn are the relative coordinates of its location on the Intel Desktop Board DP45SG, and X is the instance of the particular part at that general location. For example, J5J1 is a connector, located at 5J. It is the first connector in the 5J area.
Contents 1 Product Description .............................................................. 9 1.1 Overview.......................................................................................... 9 1.1.1 Feature Summary .................................................................. 9 1.1.2 Board Layout ....................................................................... 11 1.1.3 Block Diagram ..................................................................... 13 1.2 Legacy Considerations........
Intel Desktop Board DP45SG Technical Product Specification 2.5 2.6 2.7 2.8 2.4.1 Form Factor......................................................................... Electrical Considerations ................................................................... 2.5.1 Power Supply Considerations ................................................. 2.5.2 Fan Header Current Capability................................................ 2.5.3 Add-in Board Considerations ...............................................
Contents Figures Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure 1. Major Board Components............................................................... 2. Block Diagram.............................................................................. 3. Memory Channel and DIMM Configuration ........................................ 4. Back Panel Audio Connector Options................................................ 5.
Intel Desktop Board DP45SG Technical Product Specification Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table viii 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. Fan Header Current Capability ....................................................... Thermal Considerations for Components.......................................... Environmental Specifications .........................................................
1 Product Description 1.1 Overview 1.1.1 Feature Summary Table 1 summarizes the major features of the board. Table 1. Feature Summary Form Factor ATX (11.60 inches by 9.60 inches [294.60 millimeters by 243.
Intel Desktop Board DP45SG Technical Product Specification Table 1. Feature Summary (continued) Expansion Capabilities • Three PCI* Conventional bus add-in card connectors (SMBus routed to all PCI Conventional bus add-in card connectors) • Two PCI Express 2.
Product Description 1.1.2 Board Layout Figure 1 shows the location of the major components on the board. Figure 1. Major Board Components Table 2 lists the components identified in Figure 1.
Intel Desktop Board DP45SG Technical Product Specification Table 2.
Product Description 1.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas of the board. Figure 2.
Intel Desktop Board DP45SG Technical Product Specification 1.2 Legacy Considerations This board differs from other Intel Desktop Board products, with specific changes including (but not limited to) the following: • • • • 1.3 No No No No parallel port floppy drive connector PS/2 connectors PATA connector Online Support To find information about… ® Visit this World Wide Web site: Intel Desktop Board DP45SG http://www.intel.com/products/motherboard/DP45SG/index.
Product Description 1.5 System Memory The board has four DIMM sockets and supports the following memory features: • • • • • • • 1.5 V DDR3 SDRAM DIMMs with gold plated contacts, with the option to raise the voltage to support higher performance DDR3 SDRAM DIMMs Dual channel interleaved mode support Unbuffered, single-sided or double-sided DIMMs. 8 GB maximum total system memory. Refer to Section 2.1.1 on page 37 for information on the total amount of addressable memory.
Intel Desktop Board DP45SG Technical Product Specification 1.5.1 Memory Configurations The Intel 82P45 MCH supports the following types of memory organization: • • • Dual channel (Interleaved) mode. This mode offers the highest throughput for real world applications. Dual channel mode is enabled when the installed memory capacities of both DIMM channels are equal. Technology and device width can vary from one channel to the other but the installed memory capacity for each channel must be equal.
Product Description Figure 3.
Intel Desktop Board DP45SG Technical Product Specification Intel® P45 Chipset 1.6 The Intel P45 chipset consists of the following devices: • • Intel 82P45 Memory Controller Hub (MCH) with Direct Media Interface (DMI) interconnect Intel 82801JR I/O Controller Hub (ICH10R) The MCH component provides interfaces to the processor, memory, and PCI Express. The ICH10R is a centralized controller for the board’s I/O paths. For information about Refer to The Intel P45 chipset http://www.intel.
Product Description 1.6.2 USB The board supports up to twelve USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and EHCI-compatible drivers. The ICH10R provides the USB controller for all ports.
Intel Desktop Board DP45SG Technical Product Specification 1.6.3.2 Serial ATA RAID The board supports Intel Matrix Storage Technology which provides the following RAID (Redundant Array of Independent Drives) levels via the ICH10R: • • • • RAID RAID RAID RAID 0 - data striping 1 - data mirroring 0+1 (or RAID 10) - data striping and mirroring 5 - distributed parity NOTE In order to use supported RAID features, you must first enable RAID in the BIOS.
Product Description 1.7 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied.
Intel Desktop Board DP45SG Technical Product Specification 1.8 Legacy I/O Controller The I/O controller provides the following features: • • • • Consumer Infrared (CIR) headers Serial IRQ interface compatible with serialized IRQ support for PCI systems Intelligent power management, including a programmable wake-up event interface PCI power management support The BIOS Setup program provides configuration options for the I/O controller. 1.8.
Product Description 1.9 Audio Subsystem The onboard audio subsystem consists of the following: • • • • Intel 82801JR (ICH10R) IDT 92HD73E audio codec Back panel audio connectors Component-side audio headers: ⎯ Intel® High Definition Audio front panel header ⎯ HD audio link header ⎯ S/PDIF connector The audio subsystem supports the following features: • • • Dolby Home Theater support A signal-to-noise (S/N) ratio of 95 dB Independent multi-streaming 7.
Intel Desktop Board DP45SG Technical Product Specification 1.9.2 Audio Connectors and Headers The board contains audio connectors and headers on both the back panel and the component side of the board.
Product Description 1.
Intel Desktop Board DP45SG Technical Product Specification 1.10.2 LAN Subsystem Software LAN software and drivers are available from Intel’s World Wide Web site. For information about Refer to Obtaining LAN software and drivers http://downloadcenter.intel.com 1.10.3 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 5 below). Item Description A Link LED (Green) B Data Rate LED (Green/Yellow) Figure 5.
Product Description 1.11 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including the following: • • • Fan monitoring and control Thermal and voltage monitoring Chassis intrusion detection 1.11.
Intel Desktop Board DP45SG Technical Product Specification 1.11.4 Thermal Monitoring Figure 6 shows the locations of the thermal sensors and fan headers. Item Description A Rear chassis fan B Processor fan C Thermal diode, located on processor die D Thermal diode, located on the MCH die E Remote thermal diode F Front chassis fan G Thermal diode, located on the ICH10R die H Auxiliary chassis fan I Hardware monitoring and fan control ASIC Figure 6.
Product Description 1.12 Power Management Power management is implemented at several levels, including: • • Software support through Advanced Configuration and Power Interface (ACPI) Hardware support: ⎯ Power connector ⎯ Fan headers ⎯ LAN wake capabilities ⎯ Instantly Available PC technology ⎯ Wake from USB ⎯ Power Management Event signal (PME#) wake-up support ⎯ PCI Express WAKE# signal support 1.12.
Intel Desktop Board DP45SG Technical Product Specification Table 6 lists the system states based on how long the power switch is pressed, depending on how ACPI is configured with an ACPI-aware operating system. Table 6.
Product Description Table 7 lists the power states supported by the board along with the associated system power targets. See the ACPI specification for a complete description of the various system and power states. Table 7. Power States and Targeted System Power Processor Targeted System Power (Note 1) Global States Sleeping States States Device States G0 – working state S0 – working C0 – working D0 – working state.
Intel Desktop Board DP45SG Technical Product Specification 1.12.1.2 Wake-up Devices and Events Table 8 lists the devices or specific events that can wake the computer from specific states. Table 8.
Product Description NOTE The use of Wake from USB from an ACPI state requires an operating system that provides full ACPI support. 1.12.2.1 Power Connector ATX12V-compliant power supplies can turn off the system power through system control. When an ACPI-enabled system receives the correct command, the power supply removes all non-standby voltages. When resuming from an AC power failure, the computer returns to the power state it was in before power was interrupted (on or off).
Intel Desktop Board DP45SG Technical Product Specification 1.12.2.3 LAN Wake Capabilities CAUTION For LAN wake capabilities, the +5 V standby line for the power supply must be capable of providing adequate +5 V standby current. Failure to provide adequate standby current when implementing LAN wake capabilities can damage the power supply. LAN wake capabilities enable remote wake-up of the computer through a network.
Product Description 1.12.2.5 Wake from USB USB bus activity wakes the computer from ACPI S1 or S3 states. NOTE Wake from USB requires the use of a USB peripheral that supports Wake from USB. 1.12.2.6 Wake from CIR Consumer IR activity wakes the computer from ACPI S1 and S3 state, and optionally from the ACPI S4 and S5 state. 1.12.2.
Intel Desktop Board DP45SG Technical Product Specification Figure 7. Location of the Standby Power Indicator LED 1.12.3 ENERGY STAR* In 2007, the US Department of Energy and the US Environmental Protection Agency revised the ENERGY STAR* requirements. Intel has worked directly with these two governmental agencies to define the new requirements. Currently this Intel Desktop Board meets the new Category C requirements.
2 Technical Reference 2.1 Memory Resources 2.1.1 Addressable Memory The board utilizes 8 GB of addressable system memory. Typically the address space that is allocated for PCI Conventional bus add-in cards, PCI Express configuration space, BIOS (SPI Flash device), and chipset overhead resides above the top of DRAM (total system memory).
Intel Desktop Board DP45SG Technical Product Specification Figure 8.
Technical Reference 2.1.2 Memory Map Table 9 lists the system memory map. Table 9. System Memory Map Address Range (decimal) Address Range (hex) Size Description 1024 K - 8388608 K 100000 - 1FFFFFFFF 8191 MB Extended memory 960 K - 1024 K F0000 - FFFFF 64 KB Runtime BIOS 896 K - 960 K E0000 - EFFFF 64 KB Reserved 800 K - 896 K C8000 - DFFFF 96 KB Potential available high DOS memory (open to the PCI Conventional bus). Dependent on video adapter used.
Intel Desktop Board DP45SG Technical Product Specification 2.2.1 Back Panel Connectors Figure 9 shows the location of the back panel connectors for the Intel Desktop Board DP45SG.
Technical Reference 2.2.2 Component-side Connectors and Headers Figure 10 shows the locations of the component-side connectors and headers. Figure 10. Component-side Connectors and Headers Table 10 lists the component-side connectors and headers identified in Figure 10.
Intel Desktop Board DP45SG Technical Product Specification Table 10.
Technical Reference 2.2.2.1 Signal Tables for the Connectors and Headers Table 11. HD Audio Link Header Pin Signal Name Pin Signal Name 1 BCLK 2 Ground 3 RST# 4 DVDD IO 5 SYNC 6 Ground 7 SDO 8 3.3 V DVDD CORE 9 SDI0 10 +12 V 11 SDI1 12 Key (no pin) 13 Not connected 14 3.3 V DUAL 15 Not connected 16 Ground Table 12.
Intel Desktop Board DP45SG Technical Product Specification Table 15. Chassis Intrusion Header Pin Signal Name 1 Intruder 2 Ground Table 16. Front and Rear Chassis (3-Pin) Fan Headers Pin Signal Name 1 Control (Note) 2 +12 V 3 Note: Tach These fan headers use voltage variance control for fan speed. Table 17.
Technical Reference Table 18. S/PDIF Connector Pin Signal Name 1 VCC 2 S/PDIF out 3 Ground 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • PCI Express 2.0 x16: two PCI Express 2.0 x16 connectors ⎯ Supports PCI Express GEN1 frequency of 1.25 GHz resulting in 2.5 Gb/s each direction (500 MB/s total). Maximum theoretical bandwidth on interface of 4 GB/s in each direction simultaneously, for an aggregate of 8 GB/s when operating in x16 mode.
Intel Desktop Board DP45SG Technical Product Specification 2.2.2.3 Auxiliary Front Panel Power/Sleep LED Header Pins 1 and 3 of this header duplicate the signals on pins 2 and 4 of the front panel header. Table 19. Auxiliary Front Panel Power/Sleep LED Header Pin Signal Name In/Out Description 1 HDR_BLNK_GRN Out Front panel green LED Out Front panel yellow LED 2 Not connected 3 HDR_BLNK_YEL 2.2.2.
Technical Reference Table 21. Main Power Connector Pin Signal Name Pin Signal Name 1 +3.3 V 13 +3.3 V 2 +3.
Intel Desktop Board DP45SG Technical Product Specification 2.2.2.5 Front Panel Header This section describes the functions of the front panel header. Table 23 lists the signal names of the front panel header. Figure 11 is a connection diagram for the front panel header. Table 23.
Technical Reference • A Parallel ATA IDE hard drive or optical drive connected to an onboard Parallel ATA IDE connector 2.2.2.5.2 Reset Switch Header Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When the switch is closed, the board resets and runs the POST. 2.2.2.5.3 Power/Sleep LED Header Pins 2 and 4 can be connected to a one- or two-color LED. Table 24 shows the possible states for a one-color LED.
Intel Desktop Board DP45SG Technical Product Specification 2.2.2.6 Front Panel USB Headers Figure 12 is a connection diagram for the front panel USB headers. # INTEGRATOR’S NOTES • • The +5 V DC power on the USB headers is fused. Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 12. Connection Diagram for Front Panel USB Headers 2.2.2.7 Front Panel IEEE 1394a Header Figure 13 is a connection diagram for the IEEE 1394a header.
Technical Reference 2.3 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 14 shows the location of the jumper block. The 3-pin jumper block determines the BIOS Setup program’s mode. Table 26 describes the jumper settings for the three modes: normal, configure, and recovery.
Intel Desktop Board DP45SG Technical Product Specification 2.4 2.4.1 Mechanical Considerations Form Factor The board is designed to fit into an ATX-form-factor chassis. Figure 15 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 11.60 inches by 9.60 inches [294.60 millimeters by 243.84 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the ATX specification. Figure 15.
Technical Reference 2.5 Electrical Considerations 2.5.1 Power Supply Considerations CAUTION The +5 V standby line from the power supply must be capable of providing adequate +5 V standby current. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. Additional power required will depend on configurations chosen by the integrator.
Intel Desktop Board DP45SG Technical Product Specification 2.5.2 Fan Header Current Capability CAUTION The processor fan must be connected to the processor fan header, not to a chassis fan header. Connecting the processor fan to a chassis fan header may result in onboard component damage that will halt fan operation. Table 28 lists the current capability of the fan headers. Table 28. Fan Header Current Capability Fan Header Maximum Available Current Processor fan 2.0 A Front chassis fan 1.
Technical Reference CAUTION Ensure that the ambient temperature does not exceed the board’s maximum operating temperature. Failure to do so could cause components to exceed their maximum case temperature and malfunction. For information about the maximum operating temperature, see the environmental specifications in Section 2.7. CAUTION Ensure that proper airflow is maintained in the processor voltage regulator circuit. Failure to do so may result in damage to the voltage regulator circuit.
Intel Desktop Board DP45SG Technical Product Specification Figure 16 shows the locations of the localized high temperature zones. Item Description A B C D Processor voltage regulator area Processor Intel 82P45 MCH Intel 82801JR ICH10R Figure 16. Localized High Temperature Zones Table 29 provides maximum case temperatures for the components that are sensitive to thermal changes. The operating temperature, current load, or operating frequency could affect case temperatures.
Technical Reference 2.7 For information about Refer to Processor datasheets and specification updates Section 1.3, page 14 Intel P45 Express chipset datasheets, specification updates, and design guides http://www.intel.com/pro ducts/chipsets/index.htm Reliability The Mean Time Between Failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation is based on the Bellcore Reliability Prediction Procedure, TR-NWT-000332, Issue 4, September 1991.
Intel Desktop Board DP45SG Technical Product Specification 58
3 Overview of BIOS Features 3.1 Introduction The board uses an Intel BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as SGP4510H.86A.
Intel Desktop Board DP45SG Technical Product Specification Table 31 lists the BIOS Setup program menu features. Table 31.
Overview of BIOS Features 3.4 System Management BIOS (SMBIOS) SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in a managed network. The main component of SMBIOS is the Management Information Format (MIF) database, which contains information about the computing system and its components. Using SMBIOS, a system administrator can obtain the system types, capabilities, operational status, and installation dates for system components.
Intel Desktop Board DP45SG Technical Product Specification To install an operating system that supports USB, verify that Legacy USB support in the BIOS Setup program is set to Enabled and follow the operating system’s installation instructions. 3.6 BIOS Updates The BIOS can be updated using either of the following utilities, which are available on the Intel World Wide Web site: • • Intel® Express BIOS Update utility, which enables automated updating while in the Windows environment.
Overview of BIOS Features 3.6.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel® Integrator Toolkit or Intel® Integrator Assistant that are available from Intel can be used to create a custom splash screen. NOTE If you add a custom splash screen, it will share space with the Intel branded logo. For information about Refer to Intel® Integrator Toolkit http://developer.intel.
Intel Desktop Board DP45SG Technical Product Specification 3.8 Boot Options In the BIOS Setup program, the user can choose to boot from a diskette drive, hard drive, USB drive, USB flash drive, CD-ROM, or the network. The default setting is for the diskette drive to be the first boot device, the hard drive second, and the ATAPI CD-ROM third. If enabled, the last default boot device is the network. 3.8.
Overview of BIOS Features 3.9 Adjusting Boot Speed These factors affect system boot speed: • • 3.9.1 Selecting and configuring peripherals properly Optimized BIOS boot parameters Peripheral Selection and Configuration The following techniques help improve system boot speed: • • • • 3.9.2 Choose a hard drive with parameters such as “power-up to data ready” less than eight seconds, that minimize hard drive startup delays. Select a CD-ROM drive with a fast initialization rate.
Intel Desktop Board DP45SG Technical Product Specification 3.10 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting the computer, with the following restrictions: • • • • • • • The supervisor password gives unrestricted access to view and change all the Setup options in the BIOS Setup program. This is the supervisor mode.
4 Error Messages and Beep Codes 4.1 Speaker The board-mounted speaker provides audible error code (beep code) information during POST. 4.2 For information about Refer to The location of the onboard speaker Figure 1, page 11 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s speaker to beep an error message describing the problem (see Table 36). Table 36. Beep Codes Type 4.
Intel Desktop Board DP45SG Technical Product Specification 4.4 Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h. This code is useful for determining the point where an error occurred. Displaying the POST codes requires a PCI bus add-in card, often called a POST card.
Error Messages and Beep Codes Table 39.
Intel Desktop Board DP45SG Technical Product Specification Table 39.
Error Messages and Beep Codes Table 39.
Intel Desktop Board DP45SG Technical Product Specification Table 40.
5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Intel Desktop Board DP45SG: • • • • • 5.1.
Intel Desktop Board DP45SG Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board DP45SG is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directive 2004/108/EC (EMC Directive) and 2006/95/EC (Low Voltage Directive).
Regulatory Compliance and Battery Disposal Information Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC & 2006/95/EC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 2004/108/EC a 2006/95/EC. Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC in 2006/95/EC. Svenska Denna produkt har tillverkats i enlighet med EG-direktiv 2004/108/EC & 2006/95/EC. Türkçe Bu ürün, Avrupa Birliği’nin 2004/108/EC ve 2006/95/EC yönergelerine uyar. 5.1.
Intel Desktop Board DP45SG Technical Product Specification Español Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en los lugares seleccionados para su correspondiente reciclado. Consulte la http://www.intel.
Regulatory Compliance and Battery Disposal Information Russian В качестве части своих обязательств к окружающей среде, в Intel создана программа утилизации продукции Intel (Product Recycling Program) для предоставления конечным пользователям марок продукции Intel возможности возврата используемой продукции в специализированные пункты для должной утилизации. Пожалуйста, обратитесь на веб-сайт http://www.intel.
Intel Desktop Board DP45SG Technical Product Specification Table 42. Lead-Free Board Markings Description Mark nd Lead-Free 2 Level Interconnect: This symbol is used to identify electrical and electronic assemblies and components in which the lead (Pb) concentration level in the desktop board substrate and the solder connections from the board to the components (second-level interconnect) is not greater than 0.1% by weight (1000 ppm).
Regulatory Compliance and Battery Disposal Information 5.1.4 EMC Regulations Intel Desktop Board DP45SG complies with the EMC regulations stated in Table 43 when correctly installed in a compatible host system. Table 43. EMC Regulations Regulation Title FCC 47 CFR Part 15, Subpart B Title 47 of the Code of Federal Regulations, Part15, Subpart B, Radio Frequency Devices. (USA) ICES-003 Issue 4 (Class B) Interference-Causing Equipment Standard, Digital Apparatus.
Intel Desktop Board DP45SG Technical Product Specification Korean Class B statement translation: this is household equipment that is certified to comply with EMC requirements. You may use this equipment in residential environments and other non-residential environments. 5.1.5 Product Certification Markings (Board Level) Intel Desktop Board DP45SG has the product certification markings shown in Table 44: Table 44.
Regulatory Compliance and Battery Disposal Information 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRECAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible.
Intel Desktop Board DP45SG Technical Product Specification PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij. Batterijen moeten zoveel mogelijk worden gerecycled.
Regulatory Compliance and Battery Disposal Information AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
Intel Desktop Board DP45SG Technical Product Specification 84
