DP43TF Desktop Board Specification Update

Intel Desktop Board DP43TF Specification Update 7
Specification Changes
The Specification Changes listed in this section apply to the Intel
®
Desktop Board
DP43TF Technical Product Specification (Order Number E35962).
1. Correction of BIOS identifier in Revision History and Section 3.1.
Revision History
Revision Revision History Date
-001 First release of the Intel
®
Desktop Board DP43TF Technical Product
Specification
July 2008
This product specification applies to only the standard Intel
®
Desktop Board DP43TF with BIOS
identifier NBG4310H.86A.
Changes to this specification will be published in the Intel Desktop Board DP43TF Specification
Update before being incorporated into a revision of this document.
3.1 Introduction
The board uses an Intel BIOS that is stored in the Serial Peripheral Interface Flash
Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash
contains the BIOS Setup program, POST, the PCI auto-configuration utility, and Plug
and Play support.
The BIOS displays a message during POST identifying the type of BIOS and a revision
code. The initial production BIOSs are identified as
NBG4310H.86A.