English Product Guide

Intel Desktop Board DH61SA Product Guide
18
SATA Support
The board provides two SATA 3.0 Gb/s channels, through the PCH, which support one
device per channel.
Expandability
Intel Desktop Board DH61SA provides the following expansion capability:
• One PCI Express 2.0 x1 interface
• One Conventional PCI bus interface
Legacy I/O
The board’s Legacy I/O Controller provides the following legacy features:
• PS/2 back panel connector for mouse/keyboard support
• One serial port header
• One parallel port connector on the back panel
• Serial IRQ interface compatible with serialized IRQ support for Conventional PCI
bus systems
• Intelligent power management, including a programmable wake-up event interface
• Conventional PCI bus power management support
The BIOS Setup program provides configuration options for the Legacy I/O controller.
BIOS
The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, and the
PCI/PCI Express and SATA auto-configuration utilities. The BIOS is stored in the Serial
Peripheral Interface (SPI) Flash memory device.
The BIOS can be updated by following the instructions in Chapter 3 starting on
page 57.
SATA Auto Configuration
If you install a SATA device (such as a hard disk drive) in your computer, the auto-
configuration utility in the BIOS automatically detects and configures the device for
your computer. You do not need to run the BIOS Setup program after installing a
SATA device. You can override the auto-configuration options by specifying manual
configuration in the BIOS Setup program.