Intel® Desktop Board DH61HO Technical Product Specification October 2012 Part Number: G63529-004 The Intel® Desktop Board DH61HO may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board DH61HO Specification Update.
Revision History Revision Revision History Date -001 ® First release of the Intel Desktop Board DH61HO Technical Product Specification April 2012 -002 Specification Clarification June 2012 -003 Updated the BIOS Identification Information June 2012 -004 Specification Clarification October 2012 This product specification applies to only the standard Intel® Desktop Board DH61HO with BIOS identifier HOH6110H.86A. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS.
Board Identification Information Basic Desktop Board DH61HO Identification Information AA Revision BIOS Revision Notes G62445-101 HOH6110H.86A.0007 1,2 G62445-103 HOH6110H.86A.0011 1,2 Notes: 1. The AA number is found on a small label on the component side of the board. 2.
Intel Desktop Board DH61HO Technical Product Specification iv
Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for the Intel® Desktop Board DH61HO. Intended Audience The TPS is intended to provide detailed, technical information about the Intel Desktop Board DH61HO and its components to the vendors, system integrators, and other engineers and technicians who need this level of information. It is specifically not intended for general audiences.
Intel Desktop Board DH61HO Technical Product Specification Other Common Notation vi # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/s Gigabytes per second Gb/s Gigabits per second KB Kilobyte (1024 bytes) Kbit Kilobit (1024 bits) kbits/s 1000 bits per second MB Megabyte (1,048,576 bytes) MB/s Megabytes per second Mbit Megabit (1,048,576 bits) Mbits/s Megabits per second xxh An address or data value ending with a lowe
Contents Revision History Board Identification Information ..................................................................iii Specification Changes or Clarifications .........................................................iii Errata ......................................................................................................iii Preface Intended Audience..................................................................................... v What This Document Contains............................
Intel Desktop Board DH61HO Technical Product Specification 2 Technical Reference 2.1 Memory Resources ........................................................................... 35 2.1.1 Addressable Memory.............................................................. 35 2.1.2 Memory Map ......................................................................... 37 2.2 Connectors and Headers .................................................................... 37 2.2.1 Back Panel Connectors ...................
Contents 5.1.5 ENERGY STAR* 5.0, e-Standby, and ErP Compliance ................. 76 5.1.6 Regulatory Compliance Marks (Board Level) ............................. 77 5.2 Battery Disposal Information.............................................................. 78 Figures 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Major Board Components .................................................................. 13 Block Diagram ..................................................................................
Intel Desktop Board DH61HO Technical Product Specification 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. x Environmental Specifications .............................................................. 53 BIOS Setup Program Menu Bar........................................................... 56 BIOS Setup Program Function Keys .................................................... 56 Acceptable Drives/Media Types for BIOS Recovery................................ 59 Boot Device Menu Options ..........
1 Product Description 1.1 Overview 1.1.1 Feature Summary Table 1 summarizes the major features of the board. Table 1. Feature Summary Form Factor MicroATX (8.86 inches by 7.50 inches [225 millimeters by 190 millimeters]) Processor • 3rd generation Intel® Core processor family and 2nd generation Intel® Core processor family processors with up to 65 W TDP in an LGA1155 socket ― PCI Express* 3.
Intel Desktop Board DH61HO Technical Product Specification Table 1. Feature Summary (continued) Peripheral Interfaces • Eight USB ports: ― Four USB 2.0 ports are implemented with stacked back panel connectors ― Four USB 2.
Product Description 1.1.2 Board Layout Figure 1 shows the location of the major components on Intel Desktop Board DH61HO. Figure 1. Major Board Components Table 2 lists the components identified in Figure 1.
Intel Desktop Board DH61HO Technical Product Specification Table 2. Components Shown in Figure 1 14 Item/callout from Figure 1 Description A PCI Express 2.0 x1 bus add-in card connector B PCI Express 2.0 x1 bus add-in card connector C PCI Express 3.
Product Description 1.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas of the board. Figure 2.
Intel Desktop Board DH61HO Technical Product Specification 1.2 1.3 Online Support To find information about… Visit this World Wide Web site: Intel Desktop Board DH61HO http://www.intel.com/products/motherboard/index.htm Desktop Board Support http://www.intel.com/p/en_US/support?iid=hdr+support Available configurations for the Intel Desktop Board DH61HO http://ark.intel.com Supported processors http://processormatch.intel.com Chipset information http://www.intel.
Product Description Intel® H61 Express Chipset 1.4 The Intel H61 Express Chipset consisting of the Intel H61 Platform Controller Hub (PCH) provides interfaces to the processor and the USB, SATA, audio, network, display, and PCI Express. The PCH is a centralized controller for the board’s I/O paths. For information about Refer to The Intel H61 Express chipset http://www.intel.com/products/desktop/chipsets/index.htm Resources used by the chipset Chapter 2 1.
Intel Desktop Board DH61HO Technical Product Specification Table 3 lists the supported DIMM configurations. Table 3.
Product Description Figure 3 illustrates the memory channel and DIMM configuration. Figure 3. Memory Channel and DIMM Configuration 1.6 Graphics Subsystem The board supports system graphics through either Intel Graphics Technology or a PCI Express 3.0 x16 add-in graphics card. 1.6.1 Integrated Graphics The board supports integrated graphics through the Intel® Flexible Display Interface (Intel® FDI) for processors with Intel Graphics Technology. 1.6.1.
Intel Desktop Board DH61HO Technical Product Specification 1.7 USB The board supports up to eight USB 2.0 ports. The port arrangement is as follows: • • Four USB 2.0 ports are implemented with stacked back panel connectors Four USB 2.0 front panel ports are implemented through two dual-port internal headers All eight USB ports are high-speed, full-speed, and low-speed capable.
Product Description 1.9.1 Serial Port The serial port is implemented as a 10-pin header on the board. The serial port supports data transfers at speeds up to 115.2 kbits/s with BIOS support. For information about Refer to The location of the serial port header Figure 9, page 39 1.10 Audio Subsystem The board supports Intel High Definition Audio through the Realtek ALC662 audio codec interface.
Intel Desktop Board DH61HO Technical Product Specification 1.10.2 Audio Headers and Connectors The board contains audio connectors and headers on both the back panel and the component side of the board. The component-side audio header is a yellow 2 x 5-pin header that provides headphone and mic in signals for front panel audio connectors.
Product Description 1.
Intel Desktop Board DH61HO Technical Product Specification 1.11.3 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 5). Item Description A Link/Activity LED (green) B Link Speed LED (green/yellow) Figure 5. LAN Connector LED Locations Table 5 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 5. LAN Connector LED States LED LED Color LED State Off LAN link is not established.
Product Description 1.12 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with power applied through the power supply 5V STBY rail.
Intel Desktop Board DH61HO Technical Product Specification 1.13 Thermal Monitoring Figure 6 shows the locations of the thermal sensors and fan headers. Item Description A Rear chassis fan header B Thermal diode, located on processor die C Processor fan header D Thermal diode, located on the Intel H61 PCH Figure 6.
Product Description 1.14 Platform Management and Security Intel DH61HO Desktop Board integrates several functions designed to manage the system and lower the total cost of ownership (TCO) of the system. These system management functions are designed to report errors, diagnose the system, and recover from system lockups without the aid of an external microcontroller. 1.14.
Intel Desktop Board DH61HO Technical Product Specification 1.15 Power Management Power management is implemented at several levels, including: • • Software support through Advanced Configuration and Power Interface (ACPI) Hardware support: Power connector Fan headers LAN wake capabilities Instantly Available PC technology Wake from USB PCI Express WAKE# signal support Wake from serial port Wake from PS/2 Wake from S5 1.15.
Product Description 1.15.1.1 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. Devices that are not being used can be turned off. The operating system uses information from applications and user settings to put the system as a whole into a low-power state.
Intel Desktop Board DH61HO Technical Product Specification 1.15.1.2 Wake-up Devices and Events Table 8 lists the devices or specific events that can wake the computer from specific states. Table 8. Wake-up Devices and Events These devices/events can wake up the computer… …from this state Power switch S3, S4, S5 RTC alarm S3, S4, S5 LAN S3, S4, S5 USB S3 WAKE# signal S3, S4, S5 Serial port S3 PS/2 S3, S4, S5 Notes: • S4 implies operating system support only.
Product Description 1.15.2 Hardware Support CAUTION Ensure that the power supply provides adequate +5 V standby current if LAN wake capabilities and Instantly Available PC technology features are used. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options.
Intel Desktop Board DH61HO Technical Product Specification 1.15.2.
Product Description 1.15.2.4 Instantly Available PC Technology CAUTION For Instantly Available PC technology, the +5 V standby line for the power supply must be capable of providing adequate +5 V standby current. Failure to provide adequate standby current when implementing Instantly Available PC technology can damage the power supply. Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-toRAM) sleep-state.
Intel Desktop Board DH61HO Technical Product Specification 34
2 Technical Reference 2.1 Memory Resources 2.1.1 Addressable Memory The board utilizes 16 GB of addressable system memory. Typically the address space that is allocated for PCI Express configuration space, BIOS (SPI Flash device), and chipset overhead resides above the top of DRAM (total system memory). On a system that has 16 GB of system memory installed, it is not possible to use all of the installed memory due to system address space being allocated for other system critical functions.
Intel Desktop Board DH61HO Technical Product Specification Figure 7.
Technical Reference 2.1.2 Memory Map Table 9 lists the system memory map. Table 9. System Memory Map Address Range (decimal) Address Range (hex) Size Description 1024 K - 16777216K K 100000 – 400000000 16382 MB Extended memory 960 K - 1024 K F0000 - FFFFF 64 KB Runtime BIOS 896 K - 960 K E0000 - EFFFF 64 KB Reserved 800 K - 896 K C8000 - DFFFF 96 KB Potential available high DOS memory (open to the PCI bus). Dependent on video adapter used.
Intel Desktop Board DH61HO Technical Product Specification 2.2.1 Back Panel Connectors Figure 8 shows the location of the back panel connectors for the board. Item Description A B C D E F G H I PS/2 mouse connector PS/2 keyboard connector VGA connector UBS 2.0 ports LAN USB 2.0 ports Line in Line out/front speakers Mic in/side surround Figure 8. Back Panel Connectors NOTE The back panel audio line out connector is designed to power headphones or amplified speakers only.
Technical Reference 2.2.2 Component-side Connectors and Headers Figure 9 shows the locations of the component-side connectors and headers. Figure 9. Component-side Connectors and Headers Table 10 lists the component-side connectors and headers identified in Figure 9.
Intel Desktop Board DH61HO Technical Product Specification Table 10. Component-side Connectors and Headers Shown in Figure 9 40 Item/callout from Figure 1 Description A PCI Express 2.0 x1 bus add-in card connector B PCI Express 2.0 x1 bus add-in card connector C PCI Express 3.
Technical Reference 2.2.2.1 Signal Tables for the Connectors and Headers Table 11. Serial Port Header Pin Signal Name Pin Signal Name 1 DCD (Data Carrier Detect) 2 RXD# (Receive Data) 3 TXD# (Transmit Data) 4 DTR (Data Terminal Ready) 5 Ground 6 DSR (Data Set Ready) 7 RTS (Request To Send) 8 CTS (Clear To Send) 9 RI (Ring Indicator) 10 Key (no pin) Table 12.
Intel Desktop Board DH61HO Technical Product Specification Table 15. SATA Connectors Pin Signal Name 1 Ground 2 TXP 3 TXN 4 Ground 5 RXN 6 RXP 7 Ground Table 16. Fan Headers Pin 4-Wire Support Pin 3-Wire Support 1 Ground 3 Ground 2 +12 V 2 +12 V 3 FAN_TACH 1 FAN_TACH 4 FAN_CONTROL N/A N/A 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • • One PCI Express 3.0 x16 (3.0/2.x/1.x) Two PCI Express 2.0 x1 (2.x/1.x) NOTE PCI Express 3.
Technical Reference 2.2.2.3 Power Supply Connectors The board has the following power supply connectors: • • Main power – a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with a 2 x 10 main power cable, pins 11, 12, 23, and 24 must remain unconnected. Processor core power – a 2 x 2 connector.
Intel Desktop Board DH61HO Technical Product Specification 2.2.2.4 Front Panel Header This section describes the functions of the front panel header. Table 19 lists the signal names of the front panel header. Figure 10 is a connection diagram for the front panel header. Table 19.
Technical Reference 2.2.2.4.1 Hard Drive Activity LED Header Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to an internal storage device. Proper LED function requires a SATA hard drive or optical drive connected to an onboard SATA connector. 2.2.2.4.2 Reset Switch Header Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type switch that is normally open.
Intel Desktop Board DH61HO Technical Product Specification 2.2.2.5 Front Panel USB Header Figure 11 is a connection diagram for the front panel USB header. NOTE • • The +5 V DC power on the USB header is fused. Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 11.
Technical Reference 2.3 BIOS Configuration Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 12 shows the location of the jumper block. The 3-pin jumper block determines the BIOS Setup program’s mode. Table 21 describes the jumper settings for the three modes: normal, configure, and recovery. Figure 12. Location of the Jumper Block Table 21.
Intel Desktop Board DH61HO Technical Product Specification 2.4 2.4.1 Mechanical Considerations Form Factor The board is designed to fit into a microATX form-factor chassis. Figure 13 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 8.86 inches by 7.50 inches [225 millimeters by 190 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the ATX specification. Figure 13.
Technical Reference 2.5 Electrical Considerations 2.5.1 Power Supply Considerations CAUTION The +5 V standby line from the power supply must be capable of providing adequate +5 V standby current. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. Additional power required will depend on configurations chosen by the integrator.
Intel Desktop Board DH61HO Technical Product Specification 2.5.2 Fan Header Current Capability CAUTION The processor fan must be connected to the processor fan header, not to a chassis fan header. Connecting the processor fan to a chassis fan header may result in onboard component damage that will halt fan operation. Table 23 lists the current capability of the fan headers. Table 23. Fan Header Current Capability Fan Header Maximum Available Current Processor fan 2.0 A Rear chassis fan 1.5 A 2.5.
Technical Reference 2.6 Thermal Considerations CAUTION A chassis with a maximum internal ambient temperature of 38 oC at the processor fan inlet is required. Use of a processor heat sink that provides omni-directional airflow to maintain required airflow across the processor voltage regulator area is highly recommended. For a list of chassis that have been tested with Intel desktop boards please refer to the following website: http://www3.intel.com/cd/channel/reseller/asmo-na/eng/tech_reference/53211.
Intel Desktop Board DH61HO Technical Product Specification Figure 14 shows the locations of the localized high temperature zones. Item Description A B C Processor voltage regulator area Processor Intel H61 Express Chipset Figure 14. Localized High Temperature Zones Table 24 provides maximum case temperatures for the components that are sensitive to thermal changes. The operating temperature, current load, or operating frequency could affect case temperatures.
Technical Reference 2.7 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using a parts count method. The calculation is based on the Telcordia SR-332, Method I Case 1 50% electrical stress, 55 ºC ambient. The MTBF prediction is used to estimate repair rates and spare parts requirements. The MTBF data is calculated from predicted data at 55 ºC. The MTBF for the board is 61,582 hours. 2.8 Environmental Table 25 lists the environmental specifications for the board. Table 25.
Intel Desktop Board DH61HO Technical Product Specification 54
3 Overview of BIOS Features 3.1 Introduction The board uses an Intel BIOS that is stored in a 32 Mbit (8.192 KB) Serial Peripheral Interface Flash Memory (SPI Flash) device which can be updated using a set of utilities. The SPI Flash contains the BIOS Setup program, POST, LAN EEPROM information, Plug and Play support, and other firmware. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as HOH6110H.86A.
Intel Desktop Board DH61HO Technical Product Specification Table 26 lists the BIOS Setup program menu features. Table 26.
Overview of BIOS Features 3.2 System Management BIOS (SMBIOS) SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in a managed network. The main component of SMBIOS is the Management Information Format (MIF) database, which contains information about the computing system and its components. Using SMBIOS, a system administrator can obtain the system types, capabilities, operational status, and installation dates for system components.
Intel Desktop Board DH61HO Technical Product Specification 3.4 BIOS Updates The BIOS can be updated using either of the following utilities, which are available on the Intel World Wide Web site: • • • Intel® Express BIOS Update utility, which enables automated updating while in the Windows environment. Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB drive), or an optical drive.
Overview of BIOS Features 3.4.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel Integrator’s Toolkit that is available from Intel can be used to create a custom splash screen. For information about ® Intel Integrator Toolkit ® Additional Intel software tools Refer to http://developer.intel.com/design/motherbd/software/itk/ http://developer.intel.com/products/motherboard/DH61HO /tools.
Intel Desktop Board DH61HO Technical Product Specification 3.6 Boot Options In the BIOS Setup program, the user can choose to boot from a hard drive, optical drive, removable drive, or the network. The default setting is for the optical drive to be the first boot device, the hard drive second, removable drive third, and the network fourth. 3.6.1 Optical Drive Boot Booting from the optical drive is supported in compliance to the El Torito bootable CD-ROM format specification.
4 Error Messages and Beep Codes 4.1 Speaker Audible error code (beep code) information during POST is routed to the audio codec and can be heard through attached speakers.. 4.2 For information about Refer to The location of the onboard speaker Figure 1, page 13 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s piezoelectric speaker to beep an error message describing the problem (see Table 30). Table 30.
Intel Desktop Board DH61HO Technical Product Specification 4.3 Front-panel Power LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s front panel power LED to blink an error message describing the problem (see Table 31). Table 31. Front-panel Power LED Blink Codes Type Pattern Note F2 Setup/F10 Boot Menu None Prompt 4.4 BIOS update in progress Off when the update begins, then on for 0.5 seconds, then off for 0.5 seconds.
Error Messages and Beep Codes 4.5 Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h. This code is useful for determining the point where an error occurred.
Intel Desktop Board DH61HO Technical Product Specification Table 34.
Error Messages and Beep Codes Table 34.
Intel Desktop Board DH61HO Technical Product Specification Table 34.
Error Messages and Beep Codes Table 34. Port 80h POST Codes (continued) Port 80 Code Progress Code Enumeration Removable Media 0xB8 Resetting removable media 0xB9 Disabling removable media 0xBA Detecting presence of a removable media (IDE, CDROM detection etc.
Intel Desktop Board DH61HO Technical Product Specification Table 35.
5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Intel Desktop Board DH61HO: • • • • • 5.1.
Intel Desktop Board DH61HO Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board DH61HO is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directive 2004/108/EC (EMC Directive), 2006/95/EC (Low Voltage Directive), and 2002/95/EC (ROHS Directive).
Regulatory Compliance and Battery Disposal Information Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC, 2006/95/EC & 2002/95/EC. Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC, 2006/95/EC & 2002/95/EC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 2004/108/EC, 2006/95/EC a 2002/95/EC. Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC, 2006/95/EC in 2002/95/EC.
Intel Desktop Board DH61HO Technical Product Specification Español Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en los lugares seleccionados para su correspondiente reciclado. Consulte la http://www.intel.
Regulatory Compliance and Battery Disposal Information Russian В качестве части своих обязательств к окружающей среде, в Intel создана программа утилизации продукции Intel (Product Recycling Program) для предоставления конечным пользователям марок продукции Intel возможности возврата используемой продукции в специализированные пункты для должной утилизации. Пожалуйста, обратитесь на веб-сайт http://www.intel.
Intel Desktop Board DH61HO Technical Product Specification FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation, 5200 N.E.
Regulatory Compliance and Battery Disposal Information Japan VCCI Statement Japan VCCI Statement translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
Intel Desktop Board DH61HO Technical Product Specification 5.1.5 ENERGY STAR* 5.0, e-Standby, and ErP Compliance The US Department of Energy and the US Environmental Protection Agency have continually revised the ENERGY STAR requirements. Intel has worked directly with these two governmental agencies in the definition of new requirements.
Regulatory Compliance and Battery Disposal Information 5.1.6 Regulatory Compliance Marks (Board Level) Intel Desktop Board DH61HO has the regulatory compliance marks shown in Table 38. Table 38. Regulatory Compliance Marks Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel Desktop Boards: E210882. FCC Declaration of Conformity logo mark for Class B equipment. CE mark.
Intel Desktop Board DH61HO Technical Product Specification 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRÉCAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible.
Regulatory Compliance and Battery Disposal Information PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij. Batterijen moeten zoveel mogelijk worden gerecycled.
Intel Desktop Board DH61HO Technical Product Specification AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
Regulatory Compliance and Battery Disposal Information 81
Intel Desktop Board DH61HO Technical Product Specification 82
