Intel MEBx Settings

Intel® MEBx Settings
Version 2 – November 2008
Intel® Standard
Manageability
Configuration
Secure Firmware
Update
• Disabled
• Enabled
This option will allow the user to enable and disable secure
firmware updates. Secure firmware updates require an
administrator user name and password. If the administrator
user name and password are not supplied, the firmware cannot
be updated.
When the secure firmware update feature is enabled, you can
update the firmware using the secure method. Secure firmware
updates will pass through the LMS driver. If secure and local
firmware updates are disabled, enable them to allow the
firmware updates.
Intel® Standard
Manageability
Configuration
Set PRTC User defined Enter the Protected Real Time Clock (PRTC) value in GMT
(UTC) format (YYYY:MM:DD:HH:MM:SS). Valid date range is
1/1/2004 – 1/4/2021. Setting the PRTC value is used for
virtually maintaining the PRTC during a power off (G3) state.
This configuration will only be shown for Standard and
Advanced Provisioning Model.
Intel® Standard
Manageability
Configuration
Idle Timeout User defined This setting is used to enable and disable Intel Management
Engine Wake on LAN feature and define Intel Management
Engine idle timeout in M1 state as well. Enter the value in
minutes.
Intel® Remote Wake Technology Configuration
MEBx Menu Setting Options Description / Purpose
Intel® Remote
Wake Technology
Configuration
Intel® Remote
Wake Technology
Support
• Disabled
• Enabled
Enables or disables Intel® Remote Wake Technology.
Intel® Remote
Wake Technology
Configuration
Reset Password User defined Resets the password for Intel® Remote Wake Technology.