Product guide

Installing and Replacing Desktop Board Components

To replace the battery, follow these steps:

1. Observe the precautions in "Before You Begin" (see page 29).

2. Turn off all peripheral devices connected to th

e computer. Disconnect the

computer’s power cord from the AC power source (wall outlet or power adapter).

3. Remove the computer cover.

4. Locate the battery on the board (see Figure 26).

5. Gentl

y l

ift the battery retention clip away from the battery holder as shown in

Figure 26. The battery will “pop” out of the holder and you can then remove the

battery.

te the orientation of the “+” and “-” on the battery.

6. Install the new battery in the connector, orienting the “+” and “-” correctly.

7. Replace the computer cover.

Figure 26. Removing the Battery