Intel Desktop Board DG41RQProduct Guide

Intel Desktop Board DG41RQ Product Guide
56
To replace the battery, follow these steps:
1. Observe the precautions in "Before You Begin" (see page 25).
2. Turn off all peripheral devices connected to th
e computer. Disconnect the
computer’s power cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
4. Locate the battery on the board (see Figure 25).
5. P
u
sh the battery retention clip aside and remove the battery from the connector as
shown in Figure 25. Note the orientation of the “+” and “-” on the battery.
6. Instal
l
the new battery in the connector, making sure to orient the “+” and “-”
correctly.
7. Replace the computer cover.
Figure 25. Removing the Battery