Product guide
Table Of Contents
- Intel® Desktop Board DP55WG Product Guide
- Revision History
- Preface
- Contents
- 1 Desktop Board Features
- Supported Operating Systems
- Desktop Board Components
- Processor
- Main Memory
- Intel® P55 Express Chipset
- Audio Subsystem
- LAN Subsystem
- USB 2.0 Support
- Serial ATA Support
- Legacy I/O
- Expandability
- BIOS
- Hardware Management
- Power Management
- Onboard Power Button
- Processor and Voltage Regulator LEDs
- Back to BIOS Button
- Speaker
- Battery
- Real-Time Clock
- 2 Installing and Replacing Desktop Board Components
- Before You Begin
- Installation Precautions
- Installing the I/O Shield
- Installing and Removing the Desktop Board
- Installing and Removing a Processor
- Installing and Removing System Memory
- Installing and Removing PCI Express x16 Graphics Cards
- Connecting the Serial ATA (SATA) Cables
- Connecting to the Internal Headers
- Connecting to the Audio System
- Connecting Chassis Fan and Power Supply Cables
- Setting the BIOS Configuration Jumper
- Clearing Passwords
- Replacing the Battery
- 3 Updating the BIOS
- 4 Configuring for RAID Using Intel® Matrix Storage Technology
- A Error Messages and Indicators
- B Regulatory Compliance
Installing and Replacing Desktop Board Components
53
Connecting to the Audio System
After installing the Realtek audio driver from the Intel
®
Express Installer DVD-ROM,
the multi-channel audio feature can be enabled. Figure 28 shows the back panel audio
connectors
. The connector assignments are shown in the table.
Item Description
A Center Channel and LFE (Subwoofer)
B Surround Left and Right
C Side Surround Left and Right/Line
In/Retasking Jack
D Line Out
E Mic In
F Side Surround
Figure 28. Back Panel Audio Connectors
NOTE
The back panel line out connector is designed to power either headphones or amplified
speakers only. Poor audio quality may occur if passive (non-amplified) speakers are
connected to this output.