Specifications

Intel
®
Solid-State Drive DC P3700 Series
Product Specification July 2014
26 330566-002US
Table 19: Additional SMART Attributes (Log Identifier CAh)
Byte
# of
Bytes
Attribute
Description
0
1
AB (Program Fail Count)
Raw value: shows total count of
program fails.
Normalized value: beginning at
100, shows the percent remaining
of allowable program fails.
3
1
Normalized Value
5
6
Current Raw Value
12
1
AC (Erase Fail Count)
Raw value: shows total count of
erase fails.
Normalized value: beginning at
100, shows the percent remaining
of allowable erase fails.
15
1
Normalized Value
17
6
Current Raw Value
24
1
AD (Wear Leveling Count)
Raw value:
Bytes 1-0: Min. erase cycle
Bytes 3-2: Max. erase cycle
Bytes 5-4: Avg. erase cycles
Normalized value: decrements
from 100 to 0.
27
1
Normalized Value
29
6
Current Raw Value
36
1
B8 (End to End Error Detection Count)
Raw value: reports number of End-
to-End detected and corrected
errors by hardware.
Normalized value: always 100.
39
1
Normalized Value
41
6
Current Raw Value
48
1
C7 (CRC Error Count)
Raw value: shows total number of
encountered interface cyclic
redundancy check (CRC) errors.
Normalized value: always 100.
51
1
Normalized Value
53
6
Current Raw Value
60
1
E2 (Timed Workload, Media Wear)
Raw value: measures the wear
seen by the SSD (since reset of
the workload timer, attribute E4h),
as a percentage of the maximum
rated cycles. Divide the raw value
by 1024 to derive the percentage
with 3 decimal points.
Normalized value: always 100.
63
1
Normalized Value
65
6
Current Raw Value
72
1
E3 (Timed Workload, Host Reads %)
Raw value: shows the percentage
of I/O operations that are read
operations (since reset of the
workload timer, attribute E4h).
Reported as integer percentage
from 0 to 100.
Normalized value: always 100.
75
1
Normalized Value
77
6
Current Raw Value
84
1
E4 (Timed Workload, Timer)
Raw value: measures the elapsed
time (number of minutes since
starting this workload timer).
Normalized value: always 100.
87
1
Normalized Value
89
6
Current Raw Value
96
1
EA (Thermal Throttle Status)
Raw value: reports Percent
Throttle Status and Count of
events
Byte 0: Throttle status reported as
integer percentage.
Bytes 1-4: Throttling event count.
Number of times thermal throttle
has activated. Preserved over
power cycles.
Byte 5: Reserved.
Normalized value: always 100.
99
1
Normalized Value
101
6
Current Raw Value