Specifications
Intel
®
Solid-State Drive DC P3700 Series
July 2014 Product Specification
330566-002US 13
Electrical Characteristics
Intel
®
SSD DC P3700 Series
3.3Vaux Operating Characteristics:
Operating Voltage range
Rise time (Max/Min)
Fall time (Max/Min)
1
Noise level
Max Current
3.3 V (±9%)
50ms/1ms
5s/1ms
300 mV pp 10Hz – 100 KHz
50 mV pp 100KHz – 20 MHz
20mA/1mA (AIC/2.5-inch FF)
Notes:
1. Fall time needs to be equal or better than minimum in order to guarantee full functionality of enhanced
power loss management.
2. The drive must be powered off for at least 500msec before powering on.
3. Measured during initial power supply application. Typically this will be seen within 2 seconds of initial
power up. Inrush specified for 12V and 3.3V supply, not the 3.3Vaux.
Note: 3.3Vaux is optional, not needed for power up or functionality. 3.3Vaux is needed for accessing
VPD page by means of SMBUS for both form factor.
Table 10: Power Consumption
Specification
Unit
Intel
®
SSD DC P3700 Series
400GB
800GB
1.6TB
2TB
Active Write - Average
1
W
18
18
22
25
Active Read - Average
2
W
9
9
10
11
Idle
W
4
4
4
4
Notes:
1. The workload equates 128KB (131,072 bytes) Queue Depth equal to 128 sequential writes. Average
power is measured using scope trigger over a 100 ms sample period.
2. The workload equates 128KB (131,072 bytes) Queue Depth equal to 128 sequential reads.
2.4 Environmental Conditions
Table 11: Temperature, Shock, Vibration
Temperature
Add-In card form factor
2.5-inch form factor
Temperature
Operating
1
Non-operating
3
Ambient: 0 – 55
o
C / 0 -40
o
C
2
-55–95
o
C
Ambient: 0–35
o
C, Case: 0-70
o
C
Temperature Gradient
4
Operating
Non-operating
30
o
C/hr (Typical)
30
o
C/hr (Typical)
30
o
C/hr (Typical)
30
o
C/hr (Typical)
Humidity
Operating
Non-operating
5–95%
5–95%
5–95%
5–95%