Datasheet

Intel® Server Board S2600CW Family TPS Intel® Server Board S2600CW Functional Architecture
Revision1.11
37
Intel
®
Server Chassis P4304XXMFEN2/P4304XXMUXX support up to airflow 200LFM/55°C.
Some PCIe SSD device may require airflow 300LFM (or above), performance mode in BIOS
setup menu will need to be enabled.
When add-in card form factor PCIe SSD device requiring 300LFM (or above) used in Intel
®
Server Chassis P4304XXMUXX, the device, the card should be installed on PCIe slot 3/4/5/6, in
addition to enabling the performance mode in BIOS setup menu.
Please also see the note in Section “HTA support for Intel® Server Chassis P4304XXMFEN2 /
P4304XXMUXX with Intel® Server Board S2600CW” in Intel® Server Chassis P4304XXMFEN2 /
P4304XXMUXX TPS.
3.4.5 Serial ATA (SATA) Support
The Intel
®
C610 Series chipset provides the server board with support for up to ten Serial ATA
(SATA) ports from two integrated controllers identified as SATA and sSATA.
The Intel Server Board S2600CW family on-board SATA connectors include:
 Two 7-pin single-port SATA connectors labeled “SATA-4” and “SATA-5”; each port is
capable of supporting up to 6 Gb/sec. These connectors are intended for use with
optical drives or SATADOM devices.
 Two 4-port mini-SAS HD connectors labeled “SATA_0-3” and “sSATA_0-3”. All eight
ports are capable of supporting up to 6 Gb/sec.
The following diagram identifies the location of all on-board SATA features.
3.4.6 SATADOM Support
SATADOM devices can be used on the 7-pin SATA connectors (SATA-4 and SATA-5). There
are configuration limitations when using SATADOM due to SATADOM clearance. Two slim
type SATADOMs can be used at a time, or one slim type SATADOM on SATA-4 connector and
one low profile SATADOM on SATA-5 connector.