Datasheet

Intel® Server Board S2600CW Family TPS Power Supply Specification Guidelines
Revision1.11
123
10.2.1.1 DC Output Connector
The power supply uses a card edge output connection for power and signal that is compatible
with a 2x25 Power Card Edge connector (equivalent to 2x25 pin configuration of the FCI
power card connector 10035388-102LF).
Table 41. DC Output Connector
Pin Name Pin Name
A1 GND B1 GND
A2 GND B2 GND
A3 GND B3 GND
A4 GND B4 GND
A5 GND B5 GND
A6 GND B6 GND
A7 GND B7 GND
A8 GND B8 GND
A9 GND B9 GND
A10 +12V B10 +12V
A11 +12V B11 +12V
A12 +12V B12 +12V
A13 +12V B13 +12V
A14 +12V B14 +12V
A15 +12V B15 +12V
A16 +12V B16 +12V
A17 +12V B17 +12V
A18 +12V B18 +12V
A19 PMBus* SDA B19 A0 (SMBus* address)
A20 PMBus* SCL B20 A1 (SMBus* address)
A21 PSON B21 12V stby
A22 SMBAlert# B22 Cold Redundancy Bus
A23 Return Sense B23 12V load share bus
A24 +12V remote Sense B24 No Connect
A25 PWOK B25 Compatibility Check pin
10.2.1.2 Handle Retention
The power supply has a handle to assist extraction. The module is able to be inserted and
extracted without the assistance of tools. The power supply has a latch which retains the
power supply into the system and prevents the power supply from being inserted or extracted
from the system when the AC power cord is pulled into the power supply.
The handle protects the operator from any burn hazard.