Datasheet

Intel® Server Board S2600CW Family TPS
Intel® Server Board S2600CW Connector/Header Locations and Pin-outs
Revision1.11
107
Figure 20. Video Connector Pin-out
Note: Intel Corporation server boards support peripheral components and can contain a
number of high-density VLSI and power delivery components that need adequate airflow to
cool. Intel’s own chassis are designed and tested to meet the intended thermal requirements of
these components when the fully integrated system is used together. It is the responsibility of
the system integrator that chooses not to use Intel developed server building blocks to consult
vendor datasheets and operating parameters to determine the amount of airflow required for
their specific application and environmental conditions. Intel Corporation cannot be held
responsible if components fail or the server board does not operate correctly when used
outside any of its published operating or non-operating limits.
7.7 PCIe Riser Slot
The following table provides the pin-out for PCIe slot 6 as a riser slot.
PIN IO
SIGNAL DESCRIPTION Riser
Define (PCIe Spec)
PIN IO
SIGNAL DESCRIPTION Riser
Define (PCIe Spec)
A1 NC TP_PRSNT1_N B1 PWR P12V
A2
PWR
P12V B2
PWR
P12V
A3 PWR P12V B3 PWR P12V (RSVD)
A4 GND GND B4 GND GND
A5 PWR P3V3 (TCK) B5 I SMB_CLK_3VSB_PCI
A6 I TDI B6 IO SMB_DAT_3VSB_PCI
A7 I SAS_MODULE_ENABLE (TDO) B7 GND GND
A8 PWR P3V3 (TMS) B8 PWR P3V3
A9 PWR P3V3 B9 I TRST#
A10 PWR P3V3 B10 PWR P3V3_AUX
A11 I PERST_N B11 O WAKE_N
KEY KEY