Datasheet

Intel
®
Light Guided Diagnostics Intel
®
Server Board S2400GP TPS
Revision 1.01
Intel order number G50295-002
114
Figure 29. DIMM Fault LEDs Location
10.6 BMC Boot/Reset Status LED Indicators
During the BMC boot or BMC reset process, the System Status LED and System ID LED are
used to indicate BMC boot process transitions and states. A BMC boot will occur when AC
power is first applied to the system. A BMC reset will occur after: a BMC FW update, upon
receiving a BMC cold reset command, and upon a BMC watchdog initiated reset. The following
table defines the LED states during the BMC Boot/Reset process.