Intel® Desktop Board DB85FL Technical Product Specification October 2013 Part Number: G89973-003 The Intel Desktop Board DB85FL may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board DB85FL Specification Update.
Revision History Revision Revision History Date -001 ® First release of the Intel Desktop Board DB85FL Technical Product Specification May 2013 -002 Specification Clarification July 2013 -003 Specification Clarification October 2013 This product specification applies to only the standard Intel® Desktop Board with BIOS identifier FLB8510H.86A. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS.
Board Identification Information Basic Desktop Board DB85FL Identification Information AA Revision BIOS Revision Notes G89861 FLB8510H.86A 1,2 Notes: 1. The AA number is found on a small label on the component side of the board. 2.
Intel Desktop Board DB85FL Technical Product Specification iv
Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for Intel® Desktop Board DB85FL. Intended Audience The TPS is intended to provide detailed, technical information about Intel Desktop Board DB85FL and its components to the vendors, system integrators, and other engineers and technicians who need this level of information. It is specifically not intended for general audiences.
Intel Desktop Board DB85FL Technical Product Specification Other Common Notation vi # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/s Gigabytes per second Gb/s Gigabits per second KB Kilobyte (1024 bytes) Kb Kilobit (1024 bits) kb/s 1000 bits per second MB Megabyte (1,048,576 bytes) MB/s Megabytes per second Mb Megabit (1,048,576 bits) Mb/s Megabits per second TDP Thermal Design Power xxh An address or data value e
Contents Revision History Board Identification Information ..................................................................iii Errata ......................................................................................................iii Preface Intended Audience..................................................................................... v What This Document Contains..................................................................... v Typographical Conventions ...............................
Intel Desktop Board DB85FL Technical Product Specification 2 Technical Reference 2.1 Memory Resources ........................................................................... 39 2.1.1 Addressable Memory.............................................................. 39 2.2 Connectors and Headers .................................................................... 40 2.2.1 Back Panel Connectors ........................................................... 41 2.2.2 Component-side Connectors and Headers.......
Contents 5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance ...................................................................... 71 5.1.1 Safety Standards................................................................... 71 5.1.2 European Union Declaration of Conformity Statement ................ 72 5.1.3 Product Ecology Statements ................................................... 73 5.1.4 China RoHS ......................................................................
Intel Desktop Board DB85FL Technical Product Specification 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. x Dual-Port Front Panel USB 2.0 Header................................................. 44 Internal Mono Speaker Header ........................................................... 44 Front Panel USB 3.0 Connector........................................................... 45 SATA Connectors .......................................
1 Product Description 1.1 Overview 1.1.1 Feature Summary Table 1 summarizes the major features of the board. Table 1. Feature Summary Form Factor MicroATX (9.60 inches by 9.60 inches [243.84 millimeters by 243.
Intel Desktop Board DB85FL Technical Product Specification Table 1. Feature Summary (continued) Peripheral Interfaces • USB 3.0 ports: ― Two USB 3.0 ports are implemented with stacked back panel connectors ― Two front panel USB 3.0 ports are implemented through one internal connector • USB 2.0 ports: ― Four ports are implemented with stacked back panel connectors ― Four front panel ports are implemented through two dual-port internal connectors • Serial ATA (SATA) ports: ― Four SATA 6.
Product Description 1.1.2 Board Layout Figure 1 shows the location of the major components on Intel Desktop Board DB85FL. Figure 1.
Intel Desktop Board DB85FL Technical Product Specification Table 2 lists the components identified in Figure 1. Table 2.
Product Description 1.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas of the board. Figure 2.
Intel Desktop Board DB85FL Technical Product Specification 1.2 1.3 Online Support To find information about… Visit this World Wide Web site: Intel Desktop Board DB85FL http://www.intel.com/products/motherboard/index.htm Desktop Board Support http://www.intel.com/p/en_US/support?iid=hdr+support Available configurations for Intel Desktop Board DB85FL http://ark.intel.com Supported processors http://processormatch.intel.com Chipset information https://wwwssl.intel.
Product Description 1.3.1 Processor Graphics Subsystem The board supports graphics through either the processor Intel HD Graphics or a PCI Express x16 add-in graphics card. The board supports integrated graphics for processors with Intel HD Graphics. 1.3.1.1 Intel® High Definition (Intel® HD) Graphics The Intel HD graphics controller features the following: • 3D Features DirectX* 11.1 support • OpenGL* 4.
Intel Desktop Board DB85FL Technical Product Specification 1.3.1.3 High Definition Multimedia Interface* (HDMI*) The High-Definition Multimedia Interface (HDMI) is provided for transmitting uncompressed digital audio and video signals to television sets, projectors and other video displays. It can carry high quality multi-channel audio data and all standard and high-definition consumer electronics video formats.
Product Description 1.3.1.5 Integrated Audio Provided by the HDMI Interface The HDMI interface from the PCH supports audio. The processor supports two High Definition audio streams on two digital ports simultaneously. The following specific audio technologies are supported by the PCH: AC-3 - Dolby* Digital Dolby Digital Plus DTS-HD* LPCM, 192 kHz/24 bit, 8 Channel Dolby TrueHD, DTS-HD Master Audio* (Lossless Blu-ray Disc Audio Format) • • • • • 1.3.1.
Intel Desktop Board DB85FL Technical Product Specification 1.4 System Memory The board has four DIMM sockets and supports the following memory features: • • • • 1.5 V DDR3 SDRAM DIMMs with gold plated contacts, with the option to raise the voltage to support higher performance DDR3 SDRAM DIMMs. 1.
Product Description 1.4.1 Memory Configurations th 4 generation Intel Core processors support the following types of memory organization: • • • Dual channel (Interleaved) mode. This mode offers the highest throughput for real world applications. Dual channel mode is enabled when the installed memory capacities of both DIMM channels are equal. Technology and device width can vary from one channel to the other but the installed memory capacity for each channel must be equal.
Intel Desktop Board DB85FL Technical Product Specification Figure 3 illustrates the memory channel and DIMM configuration. Figure 3. Memory Channel and DIMM Configuration NOTE For best memory performance always install memory in the blue DIMM sockets if installing only two DIMMs on your board.
Product Description Intel® B85 Express Chipset 1.5 Intel B85 Express Chipset with Direct Media Interface (DMI) interconnect provides interfaces to the processor and USB, SATA, LPC, LAN, and PCI Express. The Intel B85 Express Chipset is a centralized controller for the board’s I/O paths. For information about Refer to The Intel B85 chipset http://www.intel.com/products/desktop/chipsets/index.htm Resources used by the chipset Chapter 2 1.5.
Intel Desktop Board DB85FL Technical Product Specification 1.5.3 SATA Interfaces The board provides six SATA connectors, through the PCH, which support one device each: • • Four SATA 6.0 Gb/s interfaces through the Intel B85 Express Chipset with SATA ACHI support (blue) Two SATA 3.0 Gb/s interfaces through the Intel B85 Express Chipset with SATA ACHI support (black) The PCH provides independent SATA ports with a theoretical maximum transfer rate of 6.0 Gb/s for four ports and 3.0 Gb/s for two ports.
Product Description 1.7 Super I/O Controller The I/O controller provides the following features: • • Serial IRQ interface compatible with serialized IRQ support for PCI systems Intelligent power management, including a programmable wake-up event interface The BIOS Setup program provides configuration options for the I/O controller. 1.8 Audio Subsystem The board supports Intel HD Audio via the Realtek ALC662s-VD audio codec.
Intel Desktop Board DB85FL Technical Product Specification 1.8.
Product Description 1.8.2.2 Internal Mono Speaker Header The internal mono speaker header allows connection to an internal, low-power PC speaker for basic system sound capability. The subsystem is capable of driving a speaker load of 8 Ohms at 1 W (rms) or 4 Ohms at 1.5 W (rms). 1.
Intel Desktop Board DB85FL Technical Product Specification • • LinkSec offload compliant with 802.3ae specification TimeSync offload compliant with 802.
Product Description Table 7 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 7. LAN Connector LED States LED Link Data Rate LED Color Green Green/Yellow LED State Condition Off LAN link is not established. On LAN link is established. Blinking LAN activity is occurring. Off 10 Mb/s data rate is selected. Green 100 Mb/s data rate is selected. Yellow 1000 Mb/s data rate is selected. 1.
Intel Desktop Board DB85FL Technical Product Specification 1.10.4 Thermal Monitoring Figure 6 shows the locations of the thermal sensors and fan headers. Item Description A Voltage regulator thermal sensor B Thermal diode, located on the processor die C Processor fan header D DIMM thermal sensor E Front chassis fan header F Thermal diode, located on the Intel B85 PCH G Rear chassis fan header Figure 6.
Product Description 1.11 Intel® Security and Manageability Technologies Intel® Security and Manageability Technologies provide tools and resources to help small business owners and IT organizations protect and manage their assets in a business or institutional environment. NOTE Software with security and/or manageability capability is required to take advantage of Intel platform security and/or management technologies. Intel® Small Business Technology 1.11.
Intel Desktop Board DB85FL Technical Product Specification 1.11.3 Intel® Virtualization Technology for Directed I/O Intel® Virtualization Technology for Directed I/O (Intel® VT-d) allows addresses in incoming I/O device memory transactions to be remapped to different host addresses. This provides Virtual Machine Monitor (VMM) software with: • Improved reliability and security through device isolation using hardware assisted remapping.
Product Description 1.12 Power Management Power management is implemented at several levels, including: • • Software support through Advanced Configuration and Power Interface (ACPI) Hardware support 1.12.1 Software Support (ACPI) ACPI gives the operating system direct control over the power management and Plug and Play functions of a computer. The use of ACPI with this board requires an operating system that provides full ACPI support.
Intel Desktop Board DB85FL Technical Product Specification Table 9. Power States and Targeted System Power Global States Sleeping States Processor States G0 – working state S0 – working C0 – working D0 – working state. Full power > 30 W G1 – sleeping state S3 – Suspend to RAM. Context saved to RAM. No power D3 – no power except for wake-up logic. Power < 5 W (Note 2) G1 – sleeping state S4 – Suspend to disk. Context saved to disk. No power D3 – no power except for wake-up logic.
Product Description 1.12.2 Hardware Support CAUTION Ensure that the power supply provides adequate +5 V standby current if LAN wake capabilities and Instantly Available PC technology features are used. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options.
Intel Desktop Board DB85FL Technical Product Specification 1.12.2.
Product Description its last known wake state. Table 10 on page 34 lists the devices and events that can wake the computer from the S3 state. The board supports the PCI Bus Power Management Interface Specification. Add-in boards that also support this specification can participate in power management and can be used to wake the computer. The use of Instantly Available PC technology requires operating system support and PCI Express add-in cards and drivers. 1.12.2.
Intel Desktop Board DB85FL Technical Product Specification 1.12.2.9 Enhanced Standby Power LED The enhanced standby power LED is lit when the board has +5 V standby voltage applied to it. It also blinks as soon as the BIOS has started executing code, once the power button has been pressed and before video has been initialized. Figure 7 shows the location of the LED.
2 Technical Reference 2.1 Memory Resources 2.1.1 Addressable Memory The board utilizes 32 GB of addressable system memory. Typically the address space that is allocated for add-in cards, PCI Express configuration space, BIOS (SPI Flash device), and chipset overhead resides above the top of DRAM (total system memory).
Intel Desktop Board DB85FL Technical Product Specification 2.2 Connectors and Headers CAUTION Only the following connectors and headers have overcurrent protection: back panel and front panel USB. The other internal connectors and headers are not overcurrent protected and should connect only to devices inside the computer’s chassis, such as fans and internal peripherals. Do not use these connectors or headers to power devices external to the computer’s chassis.
Technical Reference 2.2.1 Back Panel Connectors Figure 8 shows the location of the back panel connectors for the board. Item Description A B C D E F G H I USB 2.0 connectors HDMI connector DVI-I connector USB 3.0 connectors LAN port USB 2.0 connectors Line–in (surround) Line-out (front speakers) Mic–in (center/sub) Figure 8. Back Panel Connectors NOTE The back panel audio line out connector is designed to power headphones or amplified speakers only.
Intel Desktop Board DB85FL Technical Product Specification 2.2.2 Component-side Connectors and Headers Figure 9 shows the locations of the component-side connectors and headers. Figure 9.
Technical Reference Table 11 lists the component-side connectors and headers identified in Figure 9. Table 11. Component-side Connectors and Headers Shown in Figure 9 Item/callout from Figure 9 Description A PCI Express x1 add-in card connector B PCI Express x16 add-in card connector C PCI Express x1 add-in card connector D Processor core power connector (2 x 2) E Processor fan header F Front fan header G TPM header H Main power connector (2 x 12) I Front panel USB 3.
Intel Desktop Board DB85FL Technical Product Specification 2.2.2.1 Signal Tables for the Connectors and Headers Table 12. Front Panel Audio Connector for Intel HD Audio Pin Signal Name Pin Signal Name 1 [Port 1] Left channel 2 Ground 3 [Port 1] Right channel 4 PRESENCE# (Dongle present) 5 [Port 2] Right channel 6 [Port 1] SENSE_RETURN 7 SENSE_SEND (Jack detection) 8 Key (no pin) 9 [Port 2] Left channel 10 [Port 2] SENSE_RETURN Table 13.
Technical Reference Table 16. Front Panel USB 3.
Intel Desktop Board DB85FL Technical Product Specification Table 19. Processor, Front, and Rear Chassis (4-Pin) Fan Headers Pin Signal Name 1 Ground (Note) 2 +12 V 3 FAN_TACH 4 FAN_CONTROL Note: These fan headers use Pulse Width Modulation control for fan speed. Table 20. Chassis Intrusion Header Pin Signal Name 1 Intruder# 2 Ground Table 21.
Technical Reference 2.2.2.3 Power Supply Connectors The board has the following power supply connectors: • • Main power – a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with a 2 x 10 main power cable, attach that cable to the main power connector, leaving pins 11, 12, 23, and 24 unconnected.
Intel Desktop Board DB85FL Technical Product Specification 2.2.2.4 Front Panel Connector This section describes the functions of the front panel connector. Table 24 lists the signal names of the front panel connector. Figure 10 is a connection diagram for the front panel connector. Table 24.
Technical Reference 2.2.2.4.3 Power/Sleep LED Pins 2 and 4 can be connected to a one- or two-color LED. Table 25 shows the possible states for a one-color LED. Table 26 shows the possible states for a two-color LED. Table 25. States for a One-Color Power LED LED State Description Off Power off/sleeping Steady Green Running Table 26.
Intel Desktop Board DB85FL Technical Product Specification 2.2.2.6 Front Panel Connectors Figure 11 and Figure 12 are connection diagrams for the front panel USB connectors. NOTE • • The +5 V DC power on the USB connector is fused. Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 11. Connection Diagram for the Front Panel Dual-Port USB 2.0 Connectors Figure 12. Connection Diagram for the Front Panel USB 3.
Technical Reference 2.3 BIOS Security Jumper CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 13 shows the location of the jumper. The 3-pin jumper determines the BIOS Security program’s mode. Table 28 describes the jumper settings for the three modes: normal, lockdown, and configuration. Figure 13.
Intel Desktop Board DB85FL Technical Product Specification Table 28. BIOS Setup Security Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. Lockdown 2-3 The BIOS uses current configuration information and passwords for booting, except: • All POST Hotkeys are suppressed (prompts are not displayed and keys are not accepted. For example, F2 for Setup, F10 for the Boot Menu).
Technical Reference 2.4 2.4.1 Mechanical Considerations Form Factor The board is designed to fit into an ATX-form-factor chassis. Figure 14 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the ATX specification. Figure 14.
Intel Desktop Board DB85FL Technical Product Specification 2.5 Electrical Considerations 2.5.1 Power Supply Considerations CAUTION The +5 V standby line from the power supply must be capable of providing adequate +5 V standby current. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. Additional power required will depend on configurations chosen by the integrator.
Technical Reference 2.5.2 Fan Header Current Capability CAUTION The processor fan must be connected to the processor fan header, not to a chassis fan header. Connecting the processor fan to a chassis fan header may result in onboard component damage that will halt fan operation. Table 29 lists the current capability of the fan headers. Table 29. Fan Header Current Capability Fan Header Maximum Available Current Processor fan 2.0 A Front chassis fan 1.5 A Rear chassis fan 1.5 A 2.5.
Intel Desktop Board DB85FL Technical Product Specification CAUTION Ensure that the ambient temperature does not exceed the board’s maximum operating temperature. Failure to do so could cause components to exceed their maximum case temperature and malfunction. For information about the maximum operating temperature, see the environmental specifications in Section 2.8. CAUTION Ensure that proper airflow is maintained in the processor voltage regulator circuit.
Technical Reference Table 30 provides maximum case temperatures for the components that are sensitive to thermal changes. The operating temperature, current load, or operating frequency could affect case temperatures. Maximum case temperatures are important when considering proper airflow to cool the board. Table 30.
Intel Desktop Board DB85FL Technical Product Specification 2.7 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using a parts count method. The calculation is based on the Telcordia SR-332, Issue 3; Bellcore Method 1 Case 3 with 50% electrical stress, 55 ºC component ambient and 25 ºC system ambient. The MTBF prediction is used to estimate repair rates and spare parts requirements. The MTBF data is calculated from predicted data at 55 ºC.
3 Overview of BIOS Features 3.1 Introduction The board uses an Intel Visual BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the Visual BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as FLB8510H.86A.
Intel Desktop Board DB85FL Technical Product Specification Table 32 lists the BIOS Setup program menu features. Table 32.
Overview of BIOS Features 3.3 3.3.1 Resource Configuration PCI Express Autoconfiguration The BIOS can automatically configure PCI Express devices. PCI Express devices may be onboard or add-in cards. Autoconfiguration lets a user insert or remove PCI Express cards without having to configure the system. When a user turns on the system after adding a PCI Express card, the BIOS automatically configures interrupts, the I/O space, and other system resources.
Intel Desktop Board DB85FL Technical Product Specification 5. The operating system loads. While the operating system is loading, USB keyboards and mice are recognized and may be used to configure the operating system. (Keyboards and mice are not recognized during this period if Legacy USB support was set to Disabled in the BIOS Setup program.) 6.
Overview of BIOS Features 3.6.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel Integrator’s Toolkit version 5 that is available from Intel can be used to create a custom splash screen. NOTE If you add a custom splash screen, it will share space with the Intel branded logo. 3.7 For information about Refer to Intel Integrator Toolkit http://www.intel.
Intel Desktop Board DB85FL Technical Product Specification 3.8 Boot Options In the BIOS Setup program, the user can choose to boot from a hard drive, optical drive, removable drive, or the network. The default setting is for the optical drive to be the first boot device, the hard drive second, removable drive third, and the network fourth. 3.8.1 Optical Drive Boot Booting from the optical drive is supported in compliance to the El Torito bootable CD-ROM format specification.
Overview of BIOS Features 3.9 Adjusting Boot Speed These factors affect system boot speed: • • • Selecting and configuring peripherals properly Optimizing BIOS boot parameters Enabling the Fast Boot feature 3.9.1 Peripheral Selection and Configuration The following techniques help improve system boot speed: • • • • Choose a hard drive with parameters such as “power-up to data ready” in less than eight seconds that minimizes hard drive startup delays.
Intel Desktop Board DB85FL Technical Product Specification 3.9.3 Power Button Menu The Power Button Menu can be accessed during power on if the user presses the power button and holds it down until three short beep sounds are emitted by the board piezoelectric speaker.
Overview of BIOS Features During every POST, if a User hard disk drive password is set, POST execution will pause with the following prompt to force the user to enter the Master Key or User hard disk drive password: Enter Hard Disk Drive Password: Upon successful entry of the Master Key or User hard disk drive password, the system will continue with normal POST. If the hard disk drive password is not correctly entered, the system will go back to the above prompt.
Intel Desktop Board DB85FL Technical Product Specification • • For enhanced security, use different passwords for the supervisor and user passwords. Valid password characters are A-Z, a-z, and 0-9. Passwords may be up to 19 characters in length. Table 37 shows the effects of setting the supervisor password and user password. This table is for reference only and is not displayed on the screen. Table 37.
4 BIOS Error Codes and Messages 4.1 BIOS Error Codes The BIOS provides two types of Error Code indications during POST: • • Beep codes Blink codes 4.1.1 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s speaker (Figure 1, S) to beep an error code describing the problem (see Table 38). Table 38. BIOS Beep Codes Type Pattern Frequency F2 Setup/F10 Boot Menu One 0.5 second beep when BIOS is ready to Prompt accept keyboard input.
Intel Desktop Board DB85FL Technical Product Specification 4.1.2 Front-panel Power LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s front panel power LED to blink an error code describing the problem (see Table 39). Table 39. Front-panel Power LED Blink Codes Type Pattern Note F2 Setup/F10 Boot Menu None Prompt 4.2 BIOS update in progress Off when the update begins, then on for 0.5 seconds, then off for 0.5 seconds.
5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Intel Desktop Board DB85FL: • • • • • 5.1.
Intel Desktop Board DB85FL Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board DB85FL is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directive 2004/108/EC (EMC Directive), 2006/95/EC (Low Voltage Directive), and 2002/95/EC (ROHS Directive).
Regulatory Compliance and Battery Disposal Information Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC, 2006/95/EC & 2002/95/EC. Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC, 2006/95/EC & 2002/95/EC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 2004/108/EC, 2006/95/EC a 2002/95/EC. Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC, 2006/95/EC in 2002/95/EC.
Intel Desktop Board DB85FL Technical Product Specification 5.1.4 China RoHS Intel Desktop Board DB85FL is a China RoHS-compliant product. The China Ministry of Information Industry (MII) stipulates that a material Self Declaration Table (SDT) must be included in a product’s user documentation. The SDT for Intel Desktop Board DB85FL is shown in Figure 17. Figure 17.
Regulatory Compliance and Battery Disposal Information 5.1.5 EMC Regulations Intel Desktop Board DB85FL complies with the EMC regulations stated in Table 42 when correctly installed in a compatible host system. Table 42. EMC Regulations Regulation Title FCC 47 CFR Part 15, Subpart B Title 47 of the Code of Federal Regulations, Part 15, Subpart B, Radio Frequency Devices. (USA) ICES-003 Interference-Causing Equipment Standard, Digital Apparatus.
Intel Desktop Board DB85FL Technical Product Specification • • Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the user’s authority to operate the equipment. Tested to comply with FCC standards for home or office use.
Regulatory Compliance and Battery Disposal Information 5.1.6 e-Standby and ErP Compliance Intel Desktop Board DB85FL allows for a compliant system built to meet the following program requirements, including appropriate selection of an efficient power supply: • • • EPEAT* Korea e-Standby European Union Energy-related Products Directive (ErP) Lot 6, Tier 2 For information about Refer to Electronic Product Environmental Assessment Tool (EPEAT) http://www.epeat.net/ Korea e-Standby Program http://www.
Intel Desktop Board DB85FL Technical Product Specification 5.1.7 Regulatory Compliance Marks (Board Level) Intel Desktop Board DB85FL has the regulatory compliance marks shown in Table 43. Table 43. Regulatory Compliance Marks Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel Desktop Boards: E210882. FCC Declaration of Conformity logo mark for Class B equipment. CE mark.
Regulatory Compliance and Battery Disposal Information 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRÉCAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible.
Intel Desktop Board DB85FL Technical Product Specification PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij. Batterijen moeten zoveel mogelijk worden gerecycled.
Regulatory Compliance and Battery Disposal Information AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
Intel Desktop Board DB85FL Technical Product Specification 小心 如果更換的電池類型不正確，可能會有爆炸的危險。請盡可能將電池送至回收處。請依照當地的環保 規範來處理使用過的電池。 주의 배터리를 잘못된 종류로 교체할 경우 폭발 위험이 있습니다. 가능한 경우 배터리는 재활용해야 하며, 수명이 다한 배터리를 폐기할 때는 각 지역의 환경법을 따라야 합니다. THẬN TRỌNG Có nguy cơ xảy ra nổ nếu thay pin không đúng loại. Pin cần được tái chế nếu có thể thực hiện được. Việc thải bỏ pin đã sử dụng phải tuân theo các quy định của địa phương về môi trường.
Regulatory Compliance and Battery Disposal Information 83
Intel Desktop Board DB85FL Technical Product Specification 84
