English Product Guide

Intel Desktop Board DB43LD Product Guide
44
Connecting SATA Devices
SATA cables support the Serial ATA protocol. Each cable can be used to connect a
single SATA drive to the Desktop Board. To connect an internal SATA drive:
1. Observe the precautions in "Before You Begin" on page 29.
2. Attach one end the SATA cable to one of
the black SATA connectors on the board
(Figure 19, A).
3. Attach the
other end of the SATA
cable to the SATA drive (Figure 19, B).
Figure 19. Connecting a Serial ATA Cable
To connect an eSATA drive you must use an adapter that cables from the red eSATA
connector (Figure 1, R) to a back panel connector.