English Product Guide

Intel Desktop Board DB43LD Product Guide

+5 V Standby Power Indicator

CAUTION

If the AC power has been switched off and the standby power indicator is still lit,

disconnect the power cord before installing or removing any devices connected to the

board. Failure to do so could damage the board and any attached devices.

The Desktop Board’s +5 V standby power indicator, shown in Figure 4, is lit when

there is standby power still present on the board even when the computer appears to

be off. For example, when this green LED is lit, standby power is still present at the

memory module sockets and the PCI/PCI Express bus connectors.

Figure 4. Location of the +5 V Standby Power Indicator

For more information on standby current requirements for the Desktop Board, refer to

the Technical Product Specification by going to

http://support.intel.com/support/motherboards/desktop/

, finding the product, and

clicking on the Technical Documents tab.