Intel Desktop Board D945GCLF2D Product Guide

Processor

CAUTION

Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2)

power connector to the Desktop Board may result in damage to the board, or the

system may not function properly.

Intel Desktop Board D945GCLF2D includes a Dual-Core Intel Atom processor. The

processor is soldered to the Desktop Board and is not customer upgradeable.

Main Memory

NOTE

To be fully compliant with all applicable Intel

SDRAM memory specifications, the

board should be populated with DIMMs that support the Serial Presence Detect (SPD)

data structure. If your DIMMs do not support SPD, you will see a notification to this

effect on the screen at power up. The BIOS will attempt to configure the memory

controller for normal operation.

The Desktop Board has one 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline

Memory Module (DIMM) connector with gold-plated contacts. It supports:

• 533 MHz unbuffered, non-registered DDR2 DIMMs

• Serial Presence Detect (SPD) memory only

• Non-ECC memory

• Up to 2 GB of memory

For the latest list of tested memory, go to

http://support.intel.com/support/motherboards/desktop/