Intel Desktop Board D945GCLF2 Product Guide

Connecting to the Front Panel Header

Before connecting to the front panel header, observe the precautions in "Before You

Begin" on page 21. See Figure 11, C on page 30 for the location of the front panel

header.

Table 6 shows the pin assignments for the front panel header.

Table 6. Front Panel Header Signal Names

Pin Signal In/Out Description Pin

Signal In/Out Description

Hard Drive Activity LED Power LED

1 HD_PWR Out

Hard disk LED pull-

up (330 Ω) to +5 V

2 HDR_BLNK_GRN Out

Front panel

green LED

3 HDA# Out

Hard disk active

LED

4 HDR_BLNK_YEL Out

Front panel

yellow LED

Reset Switch On/Off Switch

5 Ground Ground 6 SWITCH_ON# In Power switch

7 FP_RESET# In Reset switch 8 Ground Ground

Power Not Connected

9 +5 V Power 10 N/C No pin

Connecting the Hi-Speed USB 2.0 Headers

Before connecting to the USB 2.0 headers, observe the precautions in "Before You

Begin" on page 21. See Figure 11, D on page 30 for the location of the USB 2.0

headers.

Table 7 shows the pin assignments for the headers.

Table 7. Hi-Speed USB 2.0 Headers Signal Names

USB Port A USB Port B

Pin Signal Name Pin Signal Name

1 Power 2 Power

3 D- 4 D-

5 D+ 6 D+

7 Ground 8 Ground

9 Key 10 No connect

Note: USB ports may be assigned as needed.