Product guide

Installing and Replacing Desktop Board Components

6. Enter the name of the RAID volume and the stripe size.

The default name for the RAID Volume is RAID_Volume1. Select the stripe value for the

RAID 0 array. The available values range from 8 KB to 128 KB in 8 KB increments. The

stripe value should be chosen based on the planned drive usage. Some suggested selections are

listed below. The default selection is 64 KB.

• 16 KB – low disk usage

• 64 KB – typical disk usage

• 128 KB – performance disk usage

7. Press the “Next” button to continue.

8. Confirm creation of the RAID volume by pressing the “Yes” button.