Product guide

Desktop Board Features

Refer to Figure 15 for the location of the

• back panel coaxial S/PDIF (RCA) connector

• back panel optical S/PDIF (Toslink) connector

NOTE

Powered speakers are required.

Related Links:

Go to the following link or pages for more information about

• audio drivers and utilities http://support.intel.com/support/motherboards/desktop/

• installing the front panel audio solution, page 51 in Chapter 2

• the location of audio connectors, page 99 in Chapter 5

Flexible 6-Channel Audio with Jack Sensing (Optional)

The Flex 6 audio subsystem includes the following:

• Intel 82801EB I/O Controller Hub (ICH5)

• Analog Devices AD1985 audio codec

• Microphone input that supports a single dynamic, condenser, or electret microphone

The subsystem has the following connectors:

• ATAPI-style CD-ROM connector

• Front panel audio connector, including pins for:

 Line out

 Mic in

• Back panel audio connectors that are configurable through the audio devices drivers.



Line in or Rear left/right out

 Line out or Front left/right out or S/PDIF line out (see Note)

 Mic in or Center LFE out

NOTE

A 1/8-inch stereo phone plug to the RCA jack adapter/splitter is required to access the S/PDIF

signal.