User Manual
Table Of Contents
- Intel® Desktop Boards D815EEA2, D815EPEA2, D815EFV, and D815EPFV Product Guide
- Revision History / Disclaimer
- Contents
- 1 Desktop Board Features
- 2 Installing and Replacing Desktop Board Components
- Before You Begin
- Installing and Removing Memory
- Installing and Removing the AGP Card Retention Mechanism
- Installing and Removing AGP and GPA Cards
- Installing the I/O Shield
- Installing the Desktop Board
- Installing a Processor
- Removing the Processor
- Installing a 1 GHz Processor Fan Heatsink
- Removing the 1 GHz Processor Fan Heatsink
- Replacing the Battery
- Setting the BIOS Configuration Jumper
- Clearing the Passwords
- 3 Updating the BIOS
- 4 Using the Setup Program
- 5 Technical Reference
- A Error Messages and Indicators
- B Regulatory Compliance
Installing and Replacing Desktop Board Components
41
4. Clip the fan (A) over the fan heatsink (B) as illustrated in Figure 20.
OM11061
A
B
C
Figure 20. Attaching the Fan to the Fan Heatsink
5. Connect the processor fan cable to the processor fan connector (see Figure 21).
OM11175
J1B1
J1B1
Figure 21. Connecting the Processor Fan Cable to the Processor Fan Connector