D5400XS Technical Product Specification

Intel Desktop Board D5400XS Technical Product Specification

INTEGRATOR’S NOTE

This board has specific requirements for providing power to the processor. Refer to

Section

2.5.1 on page 56 for information on power supply requirements for this board.

1.5 System Memory

The board has four DIMM sockets and supports the following memory features:

• 1.5 V with option to raise voltage to support higher performance DDR2 SDRAM

FBDIMMs

• Fully buffered, single-sided or double-sided FBDIMMs with the following restriction:

Double-sided FBDIMMs with x16 organization are not supported.

• 16 GB maximum total system memory. Refer to Section

2.1.1 on page 39 for

information on the total amount of addressable memory.

• Minimum total system memory: 512 MB

• Serial Presence Detect

• DDR2 800, DDR2 667, and DDR2 533 MHz SDRAM DIMMs

Table 3 lists the supported DIMM configurations.

Table 3. Supported Memory Configurations

DIMM

Capacity

Configuration

(Note 1)

SDRAM

Density

SDRAM Organization

Front-side/Back-side

Number of SDRAM

Devices

(Note 2)

512 MB SS 512 Mbit 64 M x 8/empty 8 [9]

512 MB SS 1 Gbit 64 M x 16/empty 4 [5]

1024 MB DS 512 Mbit 64 M x 8/64 M x 8 16 [18]

1024 MB SS 1 Gbit 128 M x 8/empty 8 [9]

2048 MB DS 1 Gbit 128 M x 8/128 M x 8 16 [18]

4096 MB DS 1 Gbit 256 M x 4 36 [40]

4096 MB SS 2 Gbit 512 M x 4 16 [18]

Notes:

1. In the second column, “DS” refers to double-sided memory modules (containing two rows of SDRAM)

and “SS” refers to single-sided memory modules (containing one row of SDRAM).

2. In the fifth column, the number in brackets specifies the number of SDRAM devices on an ECC DIMM.

For information about… Refer to:

Tested Memory http://support.intel.com/support/motherboards/desktop/sb/CS-

025414.htm

The Intel 5400 chipset, including memory

configurations

http://developer.intel.com/products/chipsets/5400/index.htm