PDF version

6. Power the computer on.
7. Wait 2-5 minutes for the update to complete.
8. The computer will either turn off when the recovery process is completed or it will prompt you to turn it off.
9. Remove the USB device.
10. Replace the BIOS Configuration Jumper (Figure 2 above).
11. Close the chassis.
12. Restart the computer.
After any BIOS update, Intel recommends the following steps:
1. Press F2 during boot to enter BIOS Setup.
2. Press F9 to set BIOS default values.
3. Customize any BIOS settings, if desired (optional).
4. Press F10 to save and exit BIOS Setup.