EPEAT Declaration

Template Revision March 2011 Conforms to IEEE Std 1680.1 2009 Page 4 of 9
Table 3 EPEAT Assessment Criteria for Section 4.3 Design for End of Life (EOL)
4.3 Design for End of Life (EOL)
Criteria Description Yes No NA NE Required (R)
or Optional (O)
Comments
4.3.1.1 Identification of materials with
special handling needs
NE R
4.3.1.2 Plastic parts >100 g on a product
shall not contain paints or
coatings that are not compatible
with recycling or reuse, including
metal coatings
NE R
4.3.1.3 External enclosures shall be easily
removable by one person alone
with commonly available tools
NE R
4.3.1.4 Plastic components >100 g shall
be marked with a material code in
accordance with the identification
and marking requirements of ISO
11469:2000
NE R
4.3.1.5 Circuit boards >10 cm2 (measured
on the largest face), batteries, and
other components—any of which
contain hazardous materials—shall
be safely and easily identifiable
and
removable
YES R
4.3.1.6 Only one plastic material type
shall be used in each plastic
enclosure part >100 g
NE O
4.3.1.7 Plastic enclosures shall not
contain molded-in or glued-on
metal unless metal inserts are
easy to remove by one person
alone with commonly available
tools
NE O
4.3.1.8 Minimum 65% reusable/recyclable NE R
4.3.1.9 Minimum 90% reusable/recyclable NE O
4.3.2.1 All plastic parts >25 g used in a
product shall be manually
separable by one person alone
with commonly available tools into
recyclable resin streams.
NE O
4.3.2.2 Plastic components >25 g shall be
marked with a material code in
accordance with the
identification and marking
requirements of ISO 11469:2000
NE O