Product Guide for Intel Desktop Board D2500CC

Desktop Board Features

Legacy Input/Output (I/O) Controller

The legacy I/O controller provides the following legacy features:

• One parallel port via an onboard header

• Four serial ports: two via onboard headers and two via back panel connectors

• Intelligent power management, including a programmable wake-up event interface

• Low pin count (LPC) interface

• PCI power management support

The BIOS Setup program provides configuration options for the Legacy I/O Controller.

Dual LAN Subsystem

The LAN subsystem consists of the following:

• Intel NM10 Express Chipset

• Two Intel 82574L Gigabit Ethernet Controllers for 10/100/1000 Mb/s Ethernet LAN

connectivity

• Two RJ-45 LAN connectors with integrated status LEDs

Additional features of the LAN subsystem include:

• CSMA/CD protocol engine

• LAN connect interface that supports the Ethernet controller

• Conventional PCI bus power management

 Supports ACPI technology

 Supports LAN wake capabilities

LAN drivers are available from Intel’s World Wide Web site at

http://downloadcenter.intel.com/

Two LEDs are built into the RJ-45 LAN connector located on the back panel (see

Figure 4). These LEDs indicate the operating states of the LAN.

Figure 4. LAN Status LEDs