Intel® Desktop Board D201GLY Product Guide Order Number: D84430-001
Revision History Revision -001 Revision History First release of the Intel® Desktop Board D201GLY Product Guide Date March 2007 If an FCC declaration of conformity marking is present on the board, the following statement applies: FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules.
Preface This Product Guide gives information about board layout, component installation, and regulatory requirements for Intel® Desktop Board D201GLY. Intended Audience The Product Guide is intended for technically qualified personnel. It is not intended for general audiences. Intended Uses All Intel® Desktop Boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar locations.
Intel Desktop Board D201GLY Product Guide Terminology The table below gives descriptions to some common terms used in the product guide.
Contents 1 Desktop Board Features Supported Operating Systems .............................................................................. 10 Desktop Board Components.................................................................................. 11 Processor ........................................................................................................... 13 Main Memory ...................................................................................................... 13 Chipset ...........
Intel Desktop Board D201GLY Product Guide Setting the Desktop Board Jumpers ....................................................................... 34 Front Panel Audio Header/Jumper Block ......................................................... 34 BIOS Configuration Jumper........................................................................... 35 Clearing Passwords ...................................................................................... 36 Replacing the Battery ..........................
Contents Figures 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Intel Desktop Board D201GLY Components....................................................... 11 Back Panel Audio Connectors .......................................................................... 15 LAN Connector LEDs ...................................................................................... 16 Location of the Standby Power Indicator........................................................... 19 Installing the I/O Shield ......
Intel Desktop Board D201GLY Product Guide viii
1 Desktop Board Features This chapter briefly describes the main features of Intel® Desktop Board D201GLY. Table 1 summarizes the features of the Desktop Board. Table 1. Feature Summary Form Factor Mini-ITX (171.45 millimeters [6.75 inches] x 171.45 millimeters [6.
Intel Desktop Board D201GLY Product Guide Related Links: For more information about Desktop Board D201GLY, including the Technical Product Specification (TPS), BIOS updates, and device drivers, go to: http://support.intel.
Desktop Board Features Desktop Board Components Figure 1 shows the location of the major components on Desktop Board D201GLY. Figure 1.
Intel Desktop Board D201GLY Product Guide Table 2. Desktop Boards D201GLY Components Label Description A PCI bus add-in card connector B Hi-speed USB 2.
Desktop Board Features Processor CAUTION Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2) power connector to the Desktop Board may result in damage to the board, or the system may not function properly. Desktop Board D201GLY includes an Intel Celeron processor. The processor is soldered to the Desktop Board and is not customer upgradeable.
Intel Desktop Board D201GLY Product Guide Chipset The chipset used on Desktop Board D201GLY consists of the following devices: • • SiS662 Graphics and Memory Controller (Northbridge) SiS964L I/O Controller (Southbridge) Graphics Subsystem The Desktop Board D201GLY graphics subsystem features the SiS* Mirage* 1 Graphics Engine which is integrated in the SiS662 Graphics and Memory Controller.
Desktop Board Features Item Description A Line In B Line Out C Mic In Figure 2. Back Panel Audio Connectors NOTE The back panel audio line out connector is designed to power headphones or amplified speakers only. Poor audio quality occurs if passive (non-amplified) speakers are connected to this output. Related Links: Go to the following link or pages for more information about: • • Audio drivers and utilities http://support.intel.
Intel Desktop Board D201GLY Product Guide LAN Subsystem Software For LAN software and drivers, refer to the D201GLY link on Intel’s World Wide Web site at: http://support.intel.com/support/motherboards/desktop RJ-45 LAN Connector LEDs Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 3). Figure 3. LAN Connector LEDs Table 3 describes the LED states when the board is powered up and the 10/100 Ethernet LAN subsystem is operating. Table 3.
Desktop Board Features Hi-Speed USB 2.0 Support NOTE Computer systems that have an unshielded cable attached to a USB port might not meet FCC Class B requirements, even if no device or a low-speed USB device is attached to the cable. Use a shielded cable that meets the requirements for a full-speed USB device. The Desktop Board supports up to six USB 2.0 ports (two ports routed to the back panel and four ports routed to two internal USB 2.0 headers). The USB 2.0 ports are backward compatible with USB 1.
Intel Desktop Board D201GLY Product Guide PCI Auto Configuration If you install a PCI add-in card in your computer, the PCI auto-configuration utility in the BIOS automatically detects and configures the resources (IRQs, DMA channels, and I/O space) for that add-in card. You do not need to run the BIOS Setup program after you install a PCI add-in card. Security Passwords The BIOS includes security features that restrict whether the BIOS Setup program can be accessed and who can boot the computer.
Desktop Board Features Hardware Support Power Connectors The Desktop Board has two power connectors. See Figure 12 on page 33 for the location of the power connectors. Fan Headers The Desktop Board has a 3-pin processor fan header and a 3-pin chassis fan header. See Figure 11 on page 32 for the location of the chassis fan header. The Desktop Board’s standby power indicator, shown in Figure 4, is lit when there is standby power to the system.
Intel Desktop Board D201GLY Product Guide LAN Wake Capabilities CAUTION For LAN wake capabilities, the 5 V standby line for the power supply must be capable of delivering adequate +5 V standby current. Failure to provide adequate standby current when using this feature can damage the power supply. LAN wakeup capabilities enable remote wake-up of the computer through a network.
2 Installing and Replacing Desktop Board Components This chapter tells you how to: • • • • • • • • • Install the I/O shield Install and remove the Desktop Board Install and remove memory Connect the IDE cable Connect internal headers Connect chassis fan and power supply cables Set the BIOS configuration and audio jumpers Clear passwords Replace the battery Before You Begin CAUTIONS The procedures in this chapter assume familiarity with the general terminology associated with personal computers and with th
Intel Desktop Board D201GLY Product Guide Installation Precautions When you install and test the Intel Desktop Board, observe all warnings and cautions in the installation instructions.
Installing and Replacing Desktop Board Components Installing the I/O Shield The Desktop Board comes with an I/O shield. When installed in the chassis, the shield blocks radio frequency transmissions, protects internal components from dust and foreign objects, and promotes correct airflow within the chassis. Install the I/O shield before installing the Desktop Board in the chassis. Place the shield inside the chassis as shown in Figure 5. Press the shield into place so that it fits tightly and securely.
Intel Desktop Board D201GLY Product Guide Installing and Removing the Desktop Board CAUTION Only qualified technical personnel should do this procedure. Disconnect the computer from its power source before performing the procedures described here. Failure to disconnect the power before you open the computer can result in personal injury or equipment damage. Refer to your chassis manual for instructions on installing and removing the Desktop Board.
Installing and Replacing Desktop Board Components Installing and Removing Memory NOTE To be fully compliant with all applicable Intel SDRAM memory specifications, the boards require DIMMs that support the Serial Presence Detect (SPD) data structure. You can access the PC Serial Presence Detect Specification at: http://www.intel.com/technology/memory/ddr/specs/dda18c32_64_128x72ag_a.pdf The Desktop Board has one 240-pin DDR2 DIMM socket.
Intel Desktop Board D201GLY Product Guide 1. Observe the precautions in "Before You Begin" on page 21. 2. Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the AC power cord. 3. Remove the computer’s cover and locate the DIMM socket (see Figure 8). Figure 8. Installing a DIMM 4. Make sure the clips at either end of the DIMM socket are pushed outward to the open position. 5. Holding the DIMM by the edges, remove it from its anti-static package. 6.
Installing and Replacing Desktop Board Components Removing DIMMs To remove a DIMM, follow these steps: 1. 2. 3. 4. 5. Observe the precautions in "Before You Begin" on page 21. Turn off all peripheral devices connected to the computer. Turn off the computer. Remove the AC power cord from the computer. Remove the computer’s cover. Gently spread the retaining clips at each end of the DIMM socket. The DIMM pops out of the socket. 6.
Intel Desktop Board D201GLY Product Guide Figure 9.
Installing and Replacing Desktop Board Components Connecting Internal Headers Before connecting cables to the internal headers, observe the precautions in "Before You Begin" on page 21. Figure 10 shows the location of the board’s internal headers. Item Description A Audio B Hi-speed USB 2.0 (two) C Front panel Figure 10.
Intel Desktop Board D201GLY Product Guide Installing a Front Panel Audio Solution Figure 10, A shows the location of the front panel audio header. Table 4 shows the pin assignments for the front panel audio header. Table 4.
Installing and Replacing Desktop Board Components Connecting Hi-Speed USB 2.0 Headers Before connecting the USB 2.0 headers, observe the precautions in "Before You Begin" on page 21. See Figure 10, B on page 29 for the location of the USB 2.0 headers. Table 5 shows the pin assignments for the headers. Table 5. Hi-Speed USB 2.
Intel Desktop Board D201GLY Product Guide Connecting the Chassis Fan Figure 11 shows the location of the chassis fan header. Connect the chassis fan cable to this header. Figure 11.
Installing and Replacing Desktop Board Components Connecting Supply Power Cables CAUTION Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2) power connector to the Desktop Board may result in damage to the board or the system may not function properly. Figure 12 shows the location of the power connectors. Figure 12. Connecting a 2 x 10 or 2 x 12 Power Supply Cable 1. Observe the precautions in "Before You Begin" on page 21. 2.
Intel Desktop Board D201GLY Product Guide Setting the Desktop Board Jumpers NOTE Always turn off the power and unplug the power cord from the computer before changing a jumper. Moving the jumper with the power on may result in unreliable computer operation. Figure 13. Desktop Board Jumpers Front Panel Audio Header/Jumper Block This header (Figure 13, A) has two functions: • • 34 With jumpers installed, the audio line out and mic-in signals are routed to the back panel audio connectors (see Figure 2).
Installing and Replacing Desktop Board Components Table 7 describes the two configurations of this header/jumper block. Table 7. Front Panel Audio Header/Jumper Block Jumper Setting 5 and 6 9 and 10 No jumpers installed Configuration Audio line out and mic-in signals are routed to the back panel connectors. The back panel audio connectors are shown in Figure 2. Table 4 lists the names of the signals available on this connector when no jumpers are installed.
Intel Desktop Board D201GLY Product Guide Clearing Passwords This procedure assumes that the board is installed in the computer and the configuration jumper is set to normal mode. 1. Observe the precautions in "Before You Begin" on page 21. 2. Turn off all peripheral devices connected to the computer. Turn off the computer. Disconnect the computer’s power cord from the AC power source (wall outlet or power adapter). 3. Remove the computer cover. 4. Find the configuration jumper block (see Figure 13, B). 5.
Installing and Replacing Desktop Board Components Replacing the Battery A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied.
Intel Desktop Board D201GLY Product Guide AVVERTIMENTO Esiste il pericolo di un esplosione se la pila non viene sostituita in modo corretto. Utilizzare solo pile uguali o di tipo equivalente a quelle consigliate dal produttore. Per disfarsi delle pile usate, seguire le istruzioni del produttore. PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo.
Installing and Replacing Desktop Board Components AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
Intel Desktop Board D201GLY Product Guide OСТОРОГА Використовуйте батареї правильного типу, інакше існуватиме ризик вибуху. Якщо можливо, використані батареї слід утилізувати. Утилізація використаних батарей має бути виконана згідно місцевих норм, що регулюють охорону довкілля.
Installing and Replacing Desktop Board Components To replace the battery, follow these steps: 1. Observe the precautions in "Before You Begin" (see page 21). 2. Turn off all peripheral devices connected to the computer. Disconnect the computer’s power cord from the AC power source (wall outlet or power adapter). 3. Remove the computer cover. 4. Locate the battery on the board (see Figure 14). 5. Push the battery retention clip aside and remove the battery from the connector as shown in Figure 14.
Intel Desktop Board D201GLY Product Guide 42
3 Updating the BIOS The BIOS Setup program can be used to view and change the BIOS settings for the computer. You can access the BIOS Setup program by pressing the key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. This chapter tells you how to update the BIOS by using the Iflash Memory Update Utility and how to recover the BIOS if an update fails.
Intel Desktop Board D201GLY Product Guide NOTE Review the instructions distributed with the update utility before attempting a BIOS update. CAUTION Do not interrupt the process or the system may not function properly. 1. Uncompress the BIOS update file and copy the .BIO file and IFLASH.EXE to a bootable USB flash drive or other bootable USB media. 2. Configure the BIOS or use the F10 key option during POST to boot to the USB device. 3. Manually run the IFLASH.
A BIOS Error Messages BIOS Front-panel Power LED Codes The front-panel power LED blinks off and on to display messages. For example, the power LED is on when the system is powered on, and blinks off for 0.5 second when processor initialization is complete. In addition, whenever a recoverable error occurs during POST, the BIOS causes the front-panel power LED to blink an error message describing the problem (see Table 9). Table 9.
Intel Desktop Board D201GLY Product Guide 46
B Regulatory Compliance This appendix contains the following regulatory compliance information for Desktop Board D201GLY: • • • • • Safety regulations European Union Declaration of Conformity statement Product Ecology statements Electromagnetic Compatibility (EMC) regulations Product certifications Safety Regulations Desktop Board D201GLY complies with the safety regulations stated in Table 11 when correctly installed in a compatible host system. Table 11.
Intel Desktop Board D201GLY Product Guide European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board D201GLY is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directive 89/336/EEC (EMC Directive) and Council Directive 73/23/EEC (Safety/Low Voltage Directive).
Regulatory Compliance Norsk Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 89/336/ EEC & 73/23/EEC. Polski Niniejszy produkt jest zgodny z postanowieniami Dyrektyw Unii Europejskiej 89/336/EWG i 73/23/EWG. Portuguese Este produto cumpre com as normas da Diretiva Européia 89/336/EEC & 73/23/EEC. Español Este producto cumple con las normas del Directivo Europeo 89/336/EEC & 73/23/EEC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 89/336/EEC a 73/23/EEC.
Intel Desktop Board D201GLY Product Guide Details zu diesem Programm, einschließlich der darin eingeschlossenen Produkte, verfügbaren Standorte, Versandanweisungen, Bedingungen usw., finden Sie auf der http://www.intel.com/intel/other/ehs/product_ecology.
Regulatory Compliance Portuguese Como parte deste compromisso com o respeito ao ambiente, a Intel implementou o Programa de Reciclagem de Produtos para que os consumidores finais possam enviar produtos Intel usados para locais selecionados, onde esses produtos são reciclados de maneira adequada. Consulte o site http://www.intel.
Intel Desktop Board D201GLY Product Guide Table 12 shows the lead-free board markings as they appear on the board and accompanying collateral. Table 12. Lead-Free Board Markings Description Mark nd Lead-Free 2 Level Interconnect: This symbol is used to identify electrical and electronic assemblies and components in which the lead (Pb) concentration level in the Desktop Board substrate and the solder connections from the board to the components (second-level interconnect) is not greater than 0.
Regulatory Compliance EMC Regulations Desktop Board D201GLY complies with the EMC regulations stated in Table 13 when correctly installed in a compatible host system. Table 13. EMC Regulations Regulation Title FCC Class B Title 47 of the Code of Federal Regulations, Parts 2 and 15, Subpart B, Radio Frequency Devices. (USA) ICES-003 (Class B) Interference-Causing Equipment Standard, Digital Apparatus.
Intel Desktop Board D201GLY Product Guide Korean Class B statement translation: This is household equipment that is certified to comply with EMC requirements. You may use this equipment in residential environments and other non-residential environments. Ensure Electromagnetic Compatibility (EMC) Compliance Before computer integration, make sure that the power supply and other modules or peripherals, as applicable, have passed Class B EMC testing and are marked accordingly.
Regulatory Compliance Product Certifications Board-Level Certification Markings Desktop Board D201GLY has the following product certification markings: Table 14. Product Certification Markings Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel Desktop Boards: E210882. FCC Declaration of Conformity logo mark for Class B equipment. Includes Intel name and D201GLY model designation. CE mark.
Intel Desktop Board D201GLY Product Guide Chassis and Component Certifications Ensure that the chassis and certain components; such as the power supply, peripheral drives, wiring, and cables; are components certified for the country or market where used. Agency certification marks on the product are proof of certification. Typical product certifications include: In Europe The CE marking signifies compliance with all applicable European requirements.
