Datasheet

Datasheet, Volume 1 17
Introduction
1.2.6 Embedded DisplayPort* (eDP*)
• Stand alone dedicated port (unlike two generations ago that shared pins with PCIe
interface)
1.2.7 Intel
®
Flexible Display Interface (Intel
®
FDI)
• For SKUs with graphics, carries display traffic from the Processor Graphics in the
processor to the legacy display connectors in the PCH
• Based on DisplayPort standard
• The two Intel FDI links are capable of being configured to support three
independent channels, one for each display pipeline
• There are two Intel FDI channels, each one consists of four unidirectional
downstream differential transmitter pairs:
— Scalable down to 3X, 2X, or 1X based on actual display bandwidth
requirements
— Fixed frequency 2.7 GT/s data rate
• Two sideband signals for display synchronization:
— FDI_FSYNC and FDI_LSYNC (Frame and Line Synchronization)
• One Interrupt signal used for various interrupts from the PCH:
— FDI_INT signal shared by both Intel FDI Links
• PCH supports end-to-end lane reversal across both links
• Common 100-MHz reference clock
1.3 Power Management Support
1.3.1 Processor Core
• Full support of ACPI C-states as implemented by the following processor C-states:
— C0, C1, C1E, C3, C6, C7
• Enhanced Intel SpeedStep Technology
1.3.2 System
• S0, S3, S4, S5
1.3.3 Memory Controller
• Conditional self-refresh (Intel
®
Rapid Memory Power Management (Intel
®
RMPM))
• Dynamic power down
1.3.4 PCI Express*
• L0s and L1 ASPM power management capability
1.3.5 Direct Media Interface (DMI)
• L0s and L1 ASPM power management capability