Datasheet
Electrical Specifications
106 Datasheet, Volume 1
Note:
1. Long term reliability cannot be assured in conditions above or below Max / Min functional limits.
Notes:
1. Unless otherwise noted, all specifications in this table are based on post-silicon estimates and simulations
or empirical data.
2. Each processor is programmed with a maximum valid voltage identification value (VID), which is set at
manufacturing and cannot be altered. Individual maximum VID values are calibrated during manufacturing
such that two processors at the same frequency may have different settings within the VID range. Please
note this differs from the VID employed by the processor during a power or thermal management event
(Intel Adaptive Thermal Monitor, Enhanced Intel SpeedStep Technology, or Low Power States).
Table 7-9. Processor PLL (V
CCPLL
) Supply DC Voltage and Current Specifications
Symbol Parameter Min Typ Max Unit Note
V
CCPLL
PLL supply voltage (DC + AC
specification)
— 1.8 — V
TOL
CCPLL
V
CCPLL
Tolerance AC+DC= ±5% %
I
CCMAX_VCCPLL
Max Current for V
CCPLL
Rail — — 1.2 A
I
CCTDC_VCCPLL
Thermal Design Current (TDC) for
V
CCPLL
Rail
— — 1.2 A
Table 7-10. Processor Graphics (V
AXG
) Supply DC Voltage and Current Specifications
Symbol Parameter Min Typ Max Unit Note
1
GFX_VID
Active VID Range for V
AXG
XE, SV-QC (45W)
SV-QC(35W),SV-DC
Ultra-DC
0.65
0.65
0.65
—
1.35
1.35
1.25
V 2, 3
VAXG Processor Graphics core voltage 0 - 1.52 V
I
CCMAX_VAXG
Max Current for Processor
Graphics Rail
XE, SV-QC(45W),
SV-QC (35W)
SV-DC (GT2)
SV-DC (GT1)
Ultra-DC (GT2)
Ultra-DC (GT1)
——
46
33
33
20
29
18
A
I
CCTDC_VAXG
Thermal Design Current (TDC)
for Processor Graphics Rail
XE, SV-QC(45W),
SV-QC(35W)
SV-DC (GT2)
SV-DC (GT1)
Ultra-DC (GT2) (TDP nominal)
Ultra-DC (GT2) (TDP-Up)
Ultra-DC (GT2) (TDP-Down)
Ultra-DC (GT1)
——
35
21.5
21.5
18
18.3
18.3
7.05
12
A
TOL
AXG
V
AXG
Tolerance PS0,PS1 — ±15 mV 4
PS2,PS3 — ±11.5 mV 4
Ripple
Ripple Tolerance PS0, PS1 — ±18 mV 4
PS2 — -7.5/+18.5 mV 4
PS3 — -7.5/+27.5 mV
LL
AXG
V
AXG
Loadline
GT2 based units
GT1 based units
-3.9
-4.6
m
m