Datasheet

Datasheet, Volume 1 103
Electrical Specifications
7.9 DC Specifications
The processor DC specifications in this section are defined at the processor
pins, unless noted otherwise. See Chapter 8 for the processor pin listings and
Chapter 6 for signal definitions.
• The DC specifications for the DDR3 signals are listed in Table 7-7 Control Sideband
and Test Access Port (TAP) are listed in Table 7-8.
• Table 7-14 lists the DC specifications for the processor and are valid only while
meeting specifications for junction temperature, clock frequency, and input
voltages. Care should be taken to read all notes associated with each parameter.
• AC tolerances for all DC rails include dynamic load currents at switching frequencies
up to 1 MHz.
7.9.1 Voltage and Current Specifications
Note: Noise measurements on SENSE pins for all voltage supplies should be made with a
20-MHz bandwidth oscilloscope.
Table 7-5. Processor Core (V
CC
) Active and Idle Mode DC Voltage and Current
Specifications (Sheet 1 of 2)
Symbol Parameter Segment Min Typ Max Unit Note
HFM_VID
VID Range for Highest
Frequency Mode
(Includes Turbo Mode
Operation)
XE
SV-QC-35W
SV-QC-45W
SV-DC
Ultra-DC
0.8
0.8
0.8
0.8
0.65
—
1.35
1.35
1.35
1.35
1.2
V
1, 2,
6, 8
LFM_VID
VID Range for Lowest
Frequency Mode
XE
SV-QC-35W
SV-QC-45W
SV-DC
Ultra-DC
0.65
0.65
0.65
0.65
0.65
—
0.95
0.95
0.95
0.95
0.9
V 1, 2, 8
V
CC
V
CC
for processor core 0.3-1.52 V
2, 3,
11
I
CCMAX
Maximum Processor Core
I
CC
XE
SV-QC-45W
SV-QC-35W
SV-DC
Ultra-DC
——
97.5
94
53
53
33
A 4, 6, 8
I
CC_TDC
Thermal Design I
CC
XE (TDP nominal)
XE (TDP-Up)
XE (TDP-Down)
SV-QC-45W
SV-QC-35W
SV-DC
Ultra (TDP nominal)
Ultra (TDP-Up)
Ultra (TDP-Down)
——
69.5
75.0
54.6
54.6
32.0
32.0
15.8
20.0
10.5
A
5, 6,
8, 10
I
CC_LFM
I
CC
at LFM
XE
SV-QC-45W
SV-QC-35W
SV-DC
Ultra-DC
—
—
32.0
32.0
28.0
25.0
12.5
A5