Datasheet

Datasheet 63
Electrical Specifications
Notes:
1. For functional operation, all processor electrical, signal quality, mechanical, and thermal specifications must
be satisfied.
2. Excessive overshoot or undershoot on any signal will likely result in permanent damage to the processor.
7.4.1 Storage Conditions Specifications
Environmental storage condition limits define the temperature and relative humidity
limits to which the device is exposed to while being stored in a Moisture Barrier Bag.
The specified storage conditions are for component level prior to board attach (see
notes in Table 7-9 for post board attach limits).
Table 7-9 specifies absolute maximum and minimum storage temperature limits that
represent the maximum or minimum device condition beyond which damage, latent or
otherwise, may occur. The table also specifies sustained storage temperature, relative
humidity, and time-duration limits. These limits specify the maximum or minimum
device storage conditions for a sustained period of time. At conditions outside sustained
limits, but within absolute maximum and minimum ratings, quality and reliability may
be affected.
Notes:
1. Storage conditions are applicable to storage environments only. In this scenario, the processor must not
receive a clock, and no lands can be connected to a voltage bias. Storage within these limits will not affect
the long-term reliability of the device. For functional operation, refer to the processor case temperature
specifications in the appropriate processor Thermal Mechanical Specifications and Design Guide (see
Related Documents section).
Table 7-8. Processor Absolute Minimum and Maximum Ratings
Symbol Parameter Min Max Unit Notes
1,2
V
CC
Processor core voltage with respect to
V
SS
-0.3 1.4 V
V
CCPLL
Processor PLL voltage with respect to
V
SS
-0.3 2.0 V
V
CCD
Processor I/O supply voltage for DDR3
(standard voltage) with respect to V
SS
-0.3 1.85 V
V
CCD
Processor I/O supply voltage for DDR3L
(low Voltage) with respect to V
SS
-0.3 1.7 V
V
SA
Processor SA voltage with respect to V
SS
-0.3 1.4 V
V
TTA
V
TTD
Processor analog I/O voltage with
respect to V
SS
-0.3 1.4 V
Table 7-9. Storage Condition Ratings
Symbol Parameter Min Max Unit
T
absolute storage
The minimum/maximum device storage temperature
beyond which damage (latent or otherwise) may
occur when subjected to for any length of time.
-25 125 °C
T
sustained storage
The minimum/maximum device storage temperature
for a sustained period of time.
-5 40 °C
T
short term storage
The ambient storage temperature (in shipping media)
for a short period of time.
-20 85 °C
RH
sustained storage
The maximum device storage relative humidity for a
sustained period of time.
60% @ 24 °C
Time
sustained storage
A prolonged or extended period of time; typically
associated with sustained storage conditions
Unopened bag, includes 6 months storage time by
customer.
0 30 months
Time
short term storage
A short period of time (in shipping media).
0 72 hours