Intel Celeron Processor in the 478-Pin Package at 1.80 GHz Datasheet

Datasheet 81
Intel
®
Celeron
®
Processor in the 478-Pin Package
6.2 Thermal Analysis
6.2.1 Thermal Solution Performance
Refer to the Intel
®
Pentium
®
4 Processor in the 478-pin Package Thermal Design Guidelines.
6.2.2 Measurements For Thermal Specifications
6.2.2.1 Processor Case Temperature Measurement
The maximum and minimum case temperatures (T
C
) for the Celeron processor in the 478-pin
package are specified in Table 33. These temperature specifications are meant to ensure correct and
reliable operation of the processor. Figure 31 illustrates where Intel recommends T
C
thermal
measurements should be made.
Figure 31. Guideline Locations for Case Temperature (T
C
) Thermocouple Placement
Measure from edge of processor
Measure T
at this point.
C
Thermal interface material (TIM)
should cover the entire surface of
the Integrated Heat Spreader
0.689”
17.5 mm
0.689”
17.5 mm
35 mm Package